29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:48 F/A-18А 3D-Printed & coloured Interior on decal paper

1:48 F/A-18А 3D-Printed & coloured Interior on decal paper

14.08 €
Add to Cart

1:48 F/A-18А 3D-Printed & coloured Interior on decal paper

Pre-colored three-dimensional interior elements for a model of the F/A-18A aircraft in 1:48 scale, listed under the manufacturer's part number QD48277. The elements slide off the backing paper after a short soak.

Scale1:48
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

18.76 € 14.08 €
11.64 € without VAT
−25 % You save 4.68 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F/A-18A is the single-seat early version of a carrier-based combat aircraft that serves from the decks of aircraft carriers and handles attacks on ground targets as well as combat in the air. The cockpit has extensive instrumentation and, once the model is assembled, more of it stays visible than is usual, because the canopy is large and clear.

What the set contains

These are pre-colored interior elements for the cockpit with a raised relief, listed under the manufacturer's part number QD48277. The instruments, the labels and the structure of the panels are rendered in color straight away, so laborious coloring of tiny details is no longer needed. The film is printed on backing decal paper, from which the elements slide off once soaked. The scope of the set and the layout of the individual elements are given in the instructions in the package; check whether the set fits the kit you are building against the part number QD48277 before ordering.

How the elements are applied

The elements of the QD line have no adhesive layer of their own. Cut the part out of the sheet, leave it in lukewarm water for about fifteen seconds and slide it off the backing paper into place. Do not use a decal softener or setter; they would attack the printed resin. First rid the surfaces of the kit parts the elements will go onto of excess material, true them, degrease them and go over them with gloss varnish, on which the element will grip reliably. Set the element in place and press it down with a blunt tool from the middle toward the edges; on uneven areas a drop of super glue helps. Do not press into the relief with a point, so that the structure is not crushed. The work is done before the fuselage is closed, while there is free access to the cockpit.

Terms of supply

The set of interior elements alone is supplied. The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, briefly, for about fifteen seconds in lukewarm water. Do not use a decal softener or setter, however; they would damage the printed resin.

The paper is the actual carrier of the print. The element slides off it into place after a short soak; it has no adhesive layer of its own.

The name does not state the particular kit. Check what it is intended for against the manufacturer's part number QD48277 and the instructions in the package.

Before the fuselage is closed, while there is free access to the cockpit. The surfaces have to be trued, degreased and gone over with gloss varnish beforehand.

Last seen

1:48 F/A-18А 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD482771:48

1:48 F/A-18А 3D-Printed & coloured Interior on decal paper

Pre-colored three-dimensional interior elements for a model of the F/A-18A aircraft in 1:48 scale, listed under the manufacturer's part number QD48277. The elements slide off the backing paper after a short soak.
2 leftof 4
18.76 €14.08 € You save 4.68 €
VMSVMS.P17

Spot-On Pigment No. 17 Dark Old Rust

Spot-On Pigment No. 17 Dark Old Rust is a loose VMS pigment from the numbered Spot-On line. The darkest of the rust shades of the line, intended for old corrosion that has taken deep hold.
In stock
5.16 €
FujimiFU0386981:24

1:24 Toyota Prius Solar Panel Type " Touring Selection"

A plastic kit of the Toyota Prius Touring Selection (Solar Panel Type) in 1:24 scale from the manufacturer Fujimi. An injection-molded model of the hybrid car with a solar panel on the roof.
In stock
27.96 €
Fine ArtFA-180X-07

Air cap 0,50mm for 180X airbrush

The Fine Art 0.50 mm air cap for the 180X airbrush is a replacement nozzle cap for the Fine Art 180X airbrush that allows a wider pattern and thicker paints to be sprayed.
In stock
3.96 €
AiresAIR20581:32

1:32 A-7E Corsair II electronic bays

Aires 1:32 A-7E Corsair II electronics bays is a resin detail set of the electronics bays for a plastic model of the A-7E Corsair II attack aircraft.
In stock
16.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.