1:48 Gaz-AAA wheels (UM)

Hauler 1:48 replacement wheels for the Soviet GAZ-AAA truck are an accessory for a kit you have already bought, not a model of the vehicle. On a three-axle vehicle with dual wheels at the rear, the wheels are the most conspicuous part of the running gear.

Scale1:48
Manufacturer Hauler
Product EAN8591111782685

Responsibility details are not available.

12.36 €
10.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

GAZ-AAA wheels 1:48 - a Hauler accessory

An aftermarket set of replacement wheels for the plastic kit of the Soviet GAZ-AAA truck in 1:48 scale. It is not a kit or a model: the parts replace the wheels from the box on the Unimodels kit. A truck stands high and its chassis is not covered by anything, so there is no view from any side in which the wheels can be avoided.

The real subject

The GAZ-AAA was the three-axle variant of the light Soviet truck, with 6x4 drive and dual wheels on both rear axles. The vehicle served to carry loads and people alike and became a chassis for a whole range of bodies. The wheels with their coarse off-road tread and simple rims are among its most characteristic features - and at the same time they are parts that in kits in a small scale often carry a trace of the parting line of the mold.

Tips for working it

First think through how to assemble the dual wheels: both wheels have to sit on a common axis and the gap between them has to stay clean, or the impression of an axle fitted crooked will appear. Wash the parts in warm water with detergent before painting and let them dry. It pays to paint in this order, the tire and then the rim - spray the whole wheel dark gray and paint the rim in with a brush, which is faster than masking a round rim. Once dry, go over the tread with a dry brush in a dust shade and work pigment into the pattern; on the wheels weathering is the most logical and simplest way of bringing a model to life.

Who the set is for

  • builders of Soviet trucks in 1:48 scale
  • modelers who are bothered by the trace of the parting line on the wheels from the box
  • diorama builders setting a vehicle into mud or dust
  • more experienced modelers working with super glue

This is an accessory for a model, not a kit. The base model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The package holds only replacement wheels; the plastic kit in 1:48 scale has to be owned or bought separately.

The vehicle has dual wheels on the rear axles; the extent of the set is specified in the manufacturer's instructions.

Accessory wheels tend to be cast, so wash them before painting and glue them with super glue.

A dark gray base, then once dry a light dry brush in a dust shade and pigment worked into the pattern.

Last seen

HaulerHLX482681:48

1:48 Gaz-AAA wheels (UM)

Hauler 1:48 replacement wheels for the Soviet GAZ-AAA truck are an accessory for a kit you have already bought, not a model of the vehicle. On a three-axle vehicle with dual wheels at the rear, the wheels are the most conspicuous part of the running gear.
In stock
12.36 €
ZebranomodelZE1003251:100

1:100 Panzerjaeger 35R

Panzerjäger 35R 1:100 (Zebranomodel) is a resin kit of the German tank destroyer on a captured chassis for experienced modelers and tabletop gamers.
In stock
11.16 €
U-STARUA90014

Plastic Paint Mixing Cup

The U-STAR Plastic Paint Mixing Cup is for mixing and measuring out modeling paints and thinners.
In stock
3.56 €
1:32 EF 2000B Two-seater-25 %Stock ClearanceFavorite
EduardJX1021:32

1:32 EF 2000B Two-seater

A masking set for a model of the two-seat Eurofighter EF 2000 in 1:32 scale. The pre-cut masks are stuck on before the paint is sprayed.
Last one!
7.80 €5.84 € You save 1.96 €
TrumpeterTR022121:32

1:32 P-40N War Hawk

A large injection-molded plastic kit of the Curtiss P-40N Warhawk in 1:32 scale from Trumpeter — the late lightened version of the famous American fighter. The model is supplied unassembled and unpainted.
In stock
51.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.