A photo-etched set in 1:48 scale for a model of the British Hawker Hurricane Mk.IIc fighter. It completes the model with fine metal parts.
Responsibility details are not available.
The Hurricane was a British single-seat fighter that bore the main burden of the defense of Britain in 1940. The rear of its fuselage is built on a steel tube truss structure with covering, a construction older than those used on contemporary fighters, but easy to repair. The powerplant was the V12 Merlin engine. The Mk.IIc version differs from the older machines in its armament: instead of machine guns it carries four 20 mm cannons in the wings.
Photo-etched metal parts in 1:48 scale for a model of the Mk.IIc version. Photo-etched parts make it possible to do parts in the real thickness of sheet, so on the model they look more convincing than plastic equivalents, which have to be thicker for the sake of production. The extent of the set and the kit it is cut for is given in the manufacturer's instructions.
Store the fret in its original packaging, otherwise the small parts will get lost or twisted. Cut the individual parts off with a sharp blade on a hard surface and sand the remains of the tab down, so that the part seats on the model without a gap. Bend over a sharp edge, ideally in a bender, because a straight bend cannot be made with your fingers. Glue with super glue in a tiny amount applied with the tip of a wire. Before painting, wash, degrease and prime the metal, otherwise the shade will not hold. If the set replaces a plastic part of the kit, remove the original shape before you start painting the fuselage.
A kit, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!