1:48 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Hasegawa)

1:48 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Hasegawa)

16.36 €
Add to Cart

1:48 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Hasegawa)

Ju 87B-2/R-2 3D printed colored interior on decal paper (1:48) from Quinta Studio is a ready-made accessory that raises the detail of the pilot's area on a model of the Ju 87 dive bomber quickly and without painting. Target kit: Hasegawa.

Scale1:48
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

16.36 €
13.52 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ju 87B-2/R-2 3D interior on decal paper 1:48 (Quinta Studio)

This set from Quinta Studio brings a colored cockpit interior printed by 3D technology on decal paper. It is neither a kit nor an airplane model, but a three-dimensional accessory intended for plastic models of the Ju 87B-2/R-2 in 1:48 scale. It contains instrument panels, side consoles, controls, belts and other small details, printed in color and ready to use. Dimensionally it follows the Hasegawa kit.

The real subject

The Junkers Ju 87 Stuka was a German dive bomber of the Second World War, famous for its sirens and for accurate bomb release in a steep dive. The B-2/R-2 version was the long-range conversion able to carry drop tanks, which extended the range of the machine. Its typical features were the inverted gull wings and the fixed landing gear with aerodynamic wheel spats.

How the set works

3D decals combine the relief of three-dimensional parts with the simplicity of applying a wet decal. The lengthy painting and the folding of multi-layer colored photo-etch both fall away. The part is dipped in lukewarm water for about fifteen seconds and slid off the paper onto the surface. It has no adhesive layer of its own, so the spot has to be coated with gloss varnish, and on shaped areas a drop of super glue will hold it. Do not use a decal softener or a setting solution, as they attack the printed resin and ruin the element. We recommend checking the set against the cockpit of your particular kit beforehand and adjusting the mating surfaces if needed.

Who the set is for

  • Modelers who want a three-dimensional colored interior quickly and without painting
  • Builders who do not want to work with colored photo-etch or resin
  • Advanced and moderately experienced modelers interested in faithful cockpit detail

This is an accessory, not a standalone model. The plastic model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an accessory set of colored cockpit interior; the plastic model itself is not included in the package.

No, the decals are already printed in color. You only soak them, slide them onto a spot coated with gloss varnish and let them dry; do not use a decal softener.

It is designed for Ju 87B-2/R-2 kits in 1:48 scale; it is worth checking the mating surfaces against the cockpit before gluing.

For the Hasegawa kit in 1:48 scale. The plastic parts of the base model are not included in the package.

Last seen

Quinta StudioQD480981:48

1:48 Ju 87B-2/R-2 3D-Printed & coloured Interior on decal paper (Hasegawa)

Ju 87B-2/R-2 3D printed colored interior on decal paper (1:48) from Quinta Studio is a ready-made accessory that raises the detail of the pilot's area on a model of the Ju 87 dive bomber quickly and without painting. Target kit: Hasegawa.
In stock
16.36 €
Quinta StudioQD721721:72

1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

Colored 3D printed interior elements for the Blackburn Buccaneer S.2B in the early finish, shaped for the Airfix kit in 1:72 scale. The elements are on decal paper.
In stock
16.36 €
EduardEDD480361:48

1:48 Focke-Wulf Fw-190A-8/R2 national insignia

Focke-Wulf Fw 190A-8/R2 national insignia decals (1:48) from Eduard bring a complete set of national markings for this German fighter.
In stock
6.80 €
AberABR35L2171:35

1:35 U.S. 76,2 mm M7 gun Barrel for M10 Tank Destroyer

The barrel of the American 76.2 mm M7 gun for the M10 tank destroyer is a turned metal detail set from Aber in 1:35 scale. It is not a vehicle kit but a replacement barrel for the main armament.
In stock
8.20 €
WolfpackWP482291:48

1:48 F-104 Starfighter - Martin Baker GA.7 Ejection Seat (for Kinetic Kits)

Martin Baker GA.7 - ejection seat for the F-104 Starfighter is a resin detail set in 1:48 scale from Wolfpack. It is not an airplane model but a cockpit accessory.
In stock
14.36 €
1:48 Vought F4U-5 Corsair 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD481531:48

1:48 Vought F4U-5 Corsair 3D-Printed & coloured Interior on decal paper

Quinta Studio 1:48 Vought F4U-5 Corsair — a 3D-printed colored interior on decal paper equips the cockpit of a plastic model with relief, already painted instruments and panels. The base model is not included in the package.
2 leftof 4
10.36 €7.76 € You save 2.60 €
Red Fox StudioRFSQS-320061:32

1:32 Focke-Wulf Fw190 A-8/R11 (for Revelll kit)

A set of decal elements for a model of the Focke-Wulf Fw 190A-8/R11 aircraft in 1:32 scale, shaped for the Revell kit.
In stock
19.56 €
ReskitRSU72-00901:72

1:72 F-16 F100-PW closed exhaust nozzles

1:72 F-16 with the F100-PW engine, closed exhaust nozzles is a resin set from Reskit meant for a model of the Fighting Falcon. These are replacement parts for a kit, not a model of an aircraft.
In stock
7.96 €
EduardED6350371:35

1:35 Sd.Kfz.251/1 Ausf.D radio equipment dark yellow (3D-Printed)

Sd.Kfz.251/1 Ausf.D radio equipment in 1:35 scale is a 3D-printed resin set from Eduard, supplied in a dark yellow finish for a model of the German half-track carrier.
In stock
9 €
AberABR35L2231:35

1:35 Set of 2 barrels for Soviet tank 7,62mm DT machine gun

A set of two turned metal barrels for the Soviet 7.62 mm DT tank machine gun in 1:35 scale from Aber. A precise metal accessory that replaces the plastic barrels on models of Soviet vehicles.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.