1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

16.36 €
Add to Cart

1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

Colored 3D printed interior elements for the Blackburn Buccaneer S.2B in the early finish, shaped for the Airfix kit in 1:72 scale. The elements are on decal paper.

Scale1:72
Manufacturer Quinta Studio
Product EAN7761114482752

Responsibility details are not available.

16.36 €
13.52 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Blackburn Buccaneer is a British twin-engine strike aircraft that was built from the start for penetration to the target at low altitude and high speed. The crew is a pair sitting one behind another, a pilot and a navigator. The S.2B version flew with the Royal Air Force. The cockpit is clearly visible under the glazing and empty tubs with smooth walls give a finished model away even in 1:72 scale.

What the set contains

Colored interior elements made by 3D printing, with a raised surface, so that the instruments, levers and panels have real relief and are not merely painted on. The elements are printed on carrier decal paper, from which they are transferred onto the model. They have no adhesive layer of their own: the part is cut out of the sheet, soaked for about fifteen seconds in lukewarm water and slid off the paper into place. Do not use a decal softener or a setting solution. The set is shaped for the kit from Airfix in 1:72 scale.

Building tips

First rid the surfaces under the elements of flash and of molded detail, which would make a bump under the film, and paint them a dark shade. Because the element carries no glue of its own, it needs a glossy surface to take hold: coat the area with a gloss varnish of the Future, Klear or Tamiya X-22 type and let it cure. It pays off to degrease your hands as well, the printed color layer is sensitive to grease. Cut the individual parts out with a sharp blade, after soaking slide them off the paper into place with tweezers and press them down with a soft tool, so that they seat even in the recesses; in broken-up places a drop of super glue will help. Finish the interior before you close the fuselage.

Who it is for

For modelers who want both stations legible without laborious painting of tiny instruments with a brush. The interior elements alone are supplied. The kit, the paints and the glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, similarly. Cut the part out of the sheet, leave it in lukewarm water for about fifteen seconds and slide it off the paper into place. It has no adhesive layer of its own, it holds on gloss varnish. Do not use a softener or a setting solution.

It is shaped for the Buccaneer kit from Airfix in 1:72 scale. With another kit check the shape of the parts first, they need not meet.

Level the surface under the element, paint it a dark shade and coat it with gloss varnish, on which the element will take hold. Work with tweezers and clean hands, the color layer is sensitive to grease.

Before the fuselage is closed. Once the halves are glued together you cannot get into the cockpit and the elements could no longer be seated.

Last seen

Quinta StudioQD721721:72

1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

Colored 3D printed interior elements for the Blackburn Buccaneer S.2B in the early finish, shaped for the Airfix kit in 1:72 scale. The elements are on decal paper.
In stock
16.36 €
EduardEDD480361:48

1:48 Focke-Wulf Fw-190A-8/R2 national insignia

Focke-Wulf Fw 190A-8/R2 national insignia decals (1:48) from Eduard bring a complete set of national markings for this German fighter.
In stock
6.80 €
AberABR35L2171:35

1:35 U.S. 76,2 mm M7 gun Barrel for M10 Tank Destroyer

The barrel of the American 76.2 mm M7 gun for the M10 tank destroyer is a turned metal detail set from Aber in 1:35 scale. It is not a vehicle kit but a replacement barrel for the main armament.
In stock
8.20 €
WolfpackWP482291:48

1:48 F-104 Starfighter - Martin Baker GA.7 Ejection Seat (for Kinetic Kits)

Martin Baker GA.7 - ejection seat for the F-104 Starfighter is a resin detail set in 1:48 scale from Wolfpack. It is not an airplane model but a cockpit accessory.
In stock
14.36 €
1:48 Vought F4U-5 Corsair 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD481531:48

1:48 Vought F4U-5 Corsair 3D-Printed & coloured Interior on decal paper

Quinta Studio 1:48 Vought F4U-5 Corsair — a 3D-printed colored interior on decal paper equips the cockpit of a plastic model with relief, already painted instruments and panels. The base model is not included in the package.
2 leftof 4
10.36 €7.76 € You save 2.60 €
Red Fox StudioRFSQS-320061:32

1:32 Focke-Wulf Fw190 A-8/R11 (for Revelll kit)

A set of decal elements for a model of the Focke-Wulf Fw 190A-8/R11 aircraft in 1:32 scale, shaped for the Revell kit.
In stock
19.56 €
ReskitRSU72-00901:72

1:72 F-16 F100-PW closed exhaust nozzles

1:72 F-16 with the F100-PW engine, closed exhaust nozzles is a resin set from Reskit meant for a model of the Fighting Falcon. These are replacement parts for a kit, not a model of an aircraft.
In stock
7.96 €
EduardED6350371:35

1:35 Sd.Kfz.251/1 Ausf.D radio equipment dark yellow (3D-Printed)

Sd.Kfz.251/1 Ausf.D radio equipment in 1:35 scale is a 3D-printed resin set from Eduard, supplied in a dark yellow finish for a model of the German half-track carrier.
In stock
9 €
AberABR35L2231:35

1:35 Set of 2 barrels for Soviet tank 7,62mm DT machine gun

A set of two turned metal barrels for the Soviet 7.62 mm DT tank machine gun in 1:35 scale from Aber. A precise metal accessory that replaces the plastic barrels on models of Soviet vehicles.
In stock
13.96 €
New WareNWAM06331:72

1:72 Douglas A-4M/KU Skyhawk EXPERT kabuki masks aircraft canopy

New Ware 1:72 Douglas A-4M/KU Skyhawk EXPERT kabuki masks are precisely cut masking templates of kabuki tape for a model of the late A-4 Skyhawk version in 1:72 scale, in the most complete EXPERT form.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.