20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 Mask F/A-18 C Hornet BASIC (HAS)

1:48 F/A-18C Hornet BASIC mask is a set of precisely pre-cut self-adhesive masks from the Czech maker New Ware, intended for masking the canopy glazing and further areas while the model is being sprayed. It is not a kit but an accessory for the build.

Scale1:48
Manufacturer New Ware
Product EAN8591111737593

Responsibility details are not available.

3.96 €
3.27 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F/A-18C Hornet BASIC mask in 1:48 scale from New Ware

This item is neither an aircraft model nor a set of decals. It is a modeling accessory: a sheet of self-adhesive masking film with precisely cut shapes that are applied to the parts of the model before the paint is sprayed. The BASIC designation means the basic scope of the set, that is the smallest of the levels offered for this subject. The cut-outs follow the shape of the glazing and of the other areas as they are formed on the parts of the kit the set is designed for.

Why a mask instead of a brush or a decal

Outlining the canopy frames with a brush by hand almost always ends in an uneven line and in paint running onto the clear part. A mask holds the edge given by the shape of the part, so after it is lifted off a sharp transition remains and the glazing is left without smears. Compared with a frame applied as a decal it has the advantage of being sprayed in the same paint as the surrounding areas: the shade and the level of gloss match and nowhere does the edge of a carrier film stand out.

How to work with the masks

  • First wash the parts free of any mold release residue and grease and let them dry completely.
  • Lift the mask off the sheet with pointed tweezers or a toothpick and touch only the edges, never the adhesive side.
  • Press it down with a soft tool all the way around and pay the greatest attention to the corners and the curves.
  • Apply the paint in thin coats perpendicular to the surface, so that it does not run under the edge of the film.
  • Remove the mask shortly after the paint has dried, while the coat is still flexible and the edge does not crumble.

Who the set is for

The set suits modelers who spray with an airbrush and want clean glazing and clean color transitions without the lengthy cutting of tape. It will also serve less experienced builders, because it makes masking markedly simpler and quicker. The basic scope is at the same time the smallest of the levels offered for this subject.

The package contains masks only. The kit, paints and glue are not part of the delivery.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masks, an accessory used while the model is being sprayed. The kit is not included in the package.

It is the lowest of the scope levels offered for this subject. The higher levels cover a wider range of masks.

Yes, as long as you take it off shortly after the paint has dried and pull it at an angle across the edge, not straight up. On fully cured paint it helps to warm the area with lukewarm air.

It is not intended for that. Once removed, the film loses its tack and the edge creases, so count on a single use.

Last seen

1 SYNTETIC ROUND BRUSH
-20 %
Favorite
AMMO of Mig JimenezA.MIG-8613

1 SYNTETIC ROUND BRUSH

AMMO of Mig Jimenez 1 SYNTETIC ROUND BRUSH is a small round brush in synthetic fiber, intended for details, touch-ups and small areas. This is a modeling brush, not a kit.
In stock
1.96 €1.57 € You save 0.39 €
BrassicaBRD720081:72

1:72 Trash cans

Brassica trash cans 1:72 are a resin scenic accessory for building dioramas, a set of trash cans for urban and industrial scenes.
In stock
3 €
1:48 MiL Mi-24P
-20 %
Favorite
EduardEX7981:48

1:48 MiL Mi-24P

Eduard 1:48 Mil Mi-24P is a set of die-cut masking templates in kabuki tape for spraying the cockpit glazing of the helicopter precisely.
In stock
9 €7.20 € You save 1.80 €
1:32 A6M2 Zero type 21 exteriér
-20 %
Favorite
EduardED321621:32

1:32 A6M2 Zero type 21 exteriér

Eduard 1:32 A6M2 Zero type 21 exterior is a photo-etched brass set for refining the exterior details of a model of the Japanese A6M2 Zero carrier-based fighter. An accessory for a plastic kit.
In stock
15 €12 € You save 3 €
1:48 TR-1A/B-25 %Stock ClearanceFavorite
ItaleriIT28091:48

1:48 TR-1A/B

Italeri 1:48 TR-1A/B is an injection-molded plastic kit of the American high-altitude reconnaissance aircraft derived from the legendary U-2, with the option of building both the single-seat and the two-seat version.
4 leftof 8
27.56 €20.68 € You save 6.88 €
1:35 Destroyed M1A1 Abrams base
-20 %
Favorite
Black Dog modelBDD350091:35

1:35 Destroyed M1A1 Abrams base

1:35 Destroyed M1A1 Abrams base from the Black Dog brand is a diorama base with a destroyed M1A1 Abrams main battle tank as the main element of a scene in 1:35 scale.
In stock
29.56 €23.65 € You save 5.91 €
LifecolorLIFUA7015

UA7015 - Thunder Vibe

Transitions, mists and shaded areas are a discipline where a shade with a pronounced character comes in useful. The acrylic Lifecolor Thunder Vibe belongs to this artistic part of the range.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.