SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:48 Mask Me 262 A-1a EXPERT (TAM 61087)

An Me 262 A-1a 1:48 New Ware masking set, EXPERT grade offers the widest range of pre-cut masks for a model of the first jet fighter put into operational service. Suitable where the cockpit glazing is to have no smeared edge at all.

Scale1:48
Manufacturer New Ware
Product EAN8591111737074

Responsibility details are not available.

5.56 €
4.60 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Me 262 A-1a 1:48 New Ware masking set, EXPERT grade

Cut self-adhesive masks for painting a model of the Me 262 A-1a jet fighter in 1:48 scale. The product is not a kit and not parts for building, but an aid for spraying. With this maker the EXPERT designation means the widest of the coverages offered for the set, that is the version intended for masking a model as completely as possible.

Why exactly on this type

The cockpit of the Me 262 has a great many divided panes and a prominent frame structure that cannot be missed on a model. It is the frames that decide whether a finished model reads convincingly. Pre-cut masks make sure they are the same width along their whole length and have a sharp edge. Cutting tape by hand for so many small panels almost always leads to unevenness.

The real subject

The Messerschmitt Me 262 was the first jet fighter put into operational service. It was powered by two Jumo 004 engines and its speed was markedly higher than that of the piston fighters of the day. The A-1a version was the fighter variant with 30 mm cannon armament in the nose. In service the aircraft suffered from the short life of its engines and from the care needed in handling the throttle, but in performance it marked a turning point in aircraft design.

Spraying tips

Models of this type are often finished in a combination of mottled camouflage and bare metal areas. Work from the lighter shades to the darker ones and let the paint become tacky between coats. Apply the mask to the glazing only once the cockpit interior has dried. Before lifting the mask off, run the point of a scalpel very lightly along the edge, so that the surrounding paint does not lift.

Who the set is for

  • Modelers who build jet fighters of the end of the Second World War
  • Those who want the most extensive range of masking offered
  • Builders in 1:48 scale after clean cockpit frames
  • Modelers working with an airbrush and multi-layer spraying

The package contains masking material only. The model, paints and glue are not included. The masks match a particular kit of this type, so check that they match your own model.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking set intended for painting; the kit has to be bought separately.

It is the widest range offered for the set. It covers more areas than the basic version, so there is less improvising during the build.

Only once the cockpit interior is finished and dry, just before spraying the external colors.

Usually not if it is lifted shortly after spraying. Raise the edge with tweezers and draw the mask off gradually, not with a jerk.

Last seen

New WareNWAM03671:48

1:48 Mask Me 262 A-1a EXPERT (TAM 61087)

An Me 262 A-1a 1:48 New Ware masking set, EXPERT grade offers the widest range of pre-cut masks for a model of the first jet fighter put into operational service. Suitable where the cockpit glazing is to have no smeared edge at all.
In stock
5.56 €
TamiyaTA610421:48

1:48 North American P-51B Mustang

An injection-molded plastic kit of the North American P-51B Mustang in 1:48 scale from Tamiya, the American escort fighter of the Second World War.
In stock
20.40 €
AK interactiveAK81751:35

BLOMMING YELLOW SHRUBBERIES 1:35 / 75MM / 90MM

A set of flowering growth in a yellow finish for building dioramas. Intended for 1:35 scale and for figures 75 and 90 mm in size.
In stock
9.56 €
Aires/QuickboostQB320461:32

1:32 Junkers Ju 87D gun barrels

Quickboost Junkers Ju 87D gun barrels (1:32) : resin barrels for the Ju 87D Stuka dive bomber. An aftermarket accessory, not a stand-alone model.
In stock
3.56 €
Aires/AerobonusAER4802261:48

1:48 Czech Air Force Instructor for L-39/L-59/L-159

1:48 Czech Air Force Instructor for L-39/L-59/L-159 is a resin figure of a Czech Air Force instructor in 1:48 scale. An accessory for the cockpit of a model, not an aircraft kit.
In stock
6 €
Aires/QuickboostQB491251:48

1:48 Eurofighter Typhoon F.O.D. Covers type II

1:48 Eurofighter Typhoon F.O.D. Covers type II is a resin set of air intake covers for Eurofighter Typhoon models in 1:48 scale.
In stock
6.36 €
CMKCMK42251:48

1:48 TSR-2 Airbrakes set for Airfix kit

CMK TSR-2 – airbrake set is a resin accessory for refining a model of the British strike aircraft BAC TSR-2. It is not an airplane model, but a detail set.
In stock
12.76 €
CMKF721421:72

1:72 German tankers WW II (3 fig.)

CMK German tankers is a set of three resin figures in 1:72 scale depicting a German tank crew of the Second World War.
In stock
10.76 €
GasPatch modelsGP19-721771:72

1:72 Lewis MKI Early Aviation Stripped Front (2 Items)

1:72 Lewis MKI Early Aviation Stripped Front is a resin accessory for your own kit, not a model. Two Lewis Mk I machine guns in the early aviation form with the front of the jacket removed, 1:72 scale.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.