Mil Mi-8MT BASIC masks in 1:48 from New Ware are self-adhesive painting masks for a model of this helicopter. The set is cut for the Zvezda 4828 kit.
Responsibility details are not available.
This set of self-adhesive painting masks from New Ware is intended for a model of the Mil Mi-8MT helicopter in 1:48 scale and, according to the product name, is cut for the Zvezda 4828 kit. That detail matters, because the same maker produces more than one BASIC mask set for the same type, and without knowing the target kit there would be no way to tell which one you need. It is not a kit and not a set of extra parts, but masks that you stick onto the glazing, spray over and peel off.
New Ware grades its mask sets as BASIC, ADVANCED and EXPERT. These are not duplicate items but a graduated scope: BASIC is the entry version, while the higher grades cover more. The exact make-up of the individual grades is not stated here, because the product name does not give it.
Clean and degrease the glazing before applying the masks. Lift the mask with the tip of a scalpel or with tweezers, lay it down by one edge first and only then press it down over the whole area, so that no air bubble is trapped underneath. Spray in several thin coats and let the paint flash off between them. Remove the mask shortly after the last coat has dried, not after several days, and pull it away at an acute angle. The glazing frames stand out best if you spray them in the interior shade first and only then in the exterior shade.
The set contains painting masks. The model, paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
