1:48 MiG-21 F-13 - TFace Mask Set for Eduard

Eduard 1:48 MiG-21 F-13 — TFace Masking Set

This is a masking set from Eduard, meaning a modeling accessory — not an aircraft kit. The set is designed for the MiG-21 F-13 kit in 1:48 scale from Eduard and includes pre-cut self-adhesive masks precisely shaped to match this specific kit's glazing parts. The designation TFace means the masks cover both the outer and inner side of the canopy and windscreen. This lets you paint the cockpit frames from inside and out, which significantly boosts realism on clear parts — on the real aircraft, the inner side of the frames differs in color from the outer camouflage paint. The masks are made of kabuki-type masking film, which follows curved shapes well, holds on smooth plastic, and leaves no marks once removed.

Use

• Wash and degrease the glazing parts before masking; work in a clean environment with clean hands.
• Carefully lift the masks from the sheet (tweezers or a scalpel tip help) and apply them to match the frames — align the edge first, then press down the area.
• Carefully press down the mask edges with a toothpick or a blunt point so paint doesn't seep underneath.
• Paint in thin coats, ideally with an airbrush and several light layers; a thick coat of paint increases the risk of the edge lifting.
• Remove the masks while the paint is fresh but already touch-dry — this reduces the risk of pulling up paint.

Who the set is for

For modelers building the MiG-21 F-13 in 1:48 scale who want the glazing painted sharply and cleanly on both sides, without laboriously cutting masks from tape. It will appeal to experienced builders as well as those who have so far been wary of masking clear parts — the set significantly simplifies and speeds up the work.

This is not a model. It is an accessory for a plastic kit; the kit itself, paints, and glue are not included in the package.