Quinta Studio 1:48 P-38H Lightning — a 3D-printed colored interior on decal paper completes the pilot's area of a plastic model with relief, already painted instruments and panels. It is not a kit of the aircraft.
Responsibility details are not available.
The set belongs to the range in which Quinta Studio combines three-dimensional printing with decal paper. The details are printed with a relief and painted at the factory, so they go into the cockpit of a Lightning model in 1:48 scale finished — without painting dials and without assembling photo-etched pieces.
The pilot's area of the Lightning is set in a short central nacelle and is clearly visible from above and from the side on a finished model. That is exactly why it pays not to rely only on the molded plastic panel: colored relief panels, side walls and controls move the impression of the cockpit on more than any other modification that can be done in a few tens of minutes.
The order of work is fundamental: finish the interior before you close the nacelle up and fit the canopy. Coat the surface with a dark color and let it cure; a decal adheres better to a smooth surface. Cut the pieces out of the sheet with a small border, soak them briefly and move them with a damp brush, never dry with tweezers. A decal softener and a setting solution do not belong here, as they would attack the printed resin. Once the interior has dried, even it out with a matte varnish so that the gloss from the decal does not shout, and only then go on assembling.
This is an accessory for a cockpit, not a kit of the aircraft. The base model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
