20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 Panavia Tornado IDS TFace

Eduard 1:48 Panavia Tornado IDS TFace is a masking set for the outside and the inside of the clear parts of a model of the two-seat swing-wing combat aircraft.

Scale1:48
Manufacturer Vyprodáno
Product EAN9991111315112

Responsibility details are not available.

11.80 €
9.75 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 Panavia Tornado IDS TFace masking set

A self-adhesive masking set for a model in 1:48 scale from the Czech maker Eduard. The TFace designation means that the set holds masks for both sides of the clear part. The canopy frames can therefore be sprayed from the inside in the cockpit interior shade and only then from the outside in the top color of the airframe. On a tandem cockpit with long glazing that difference shows a great deal on the finished model. It is not a kit nor decals, but an accessory for the build.

The real subject

The Panavia Tornado IDS is a twin-engine, two-seat combat aircraft with a variable-sweep wing, developed in international cooperation and meant for strikes on ground targets from low level. The crew is a pilot and a navigator seated one behind the other, so the cockpit is long and covered by multi-part glazing with a fixed windshield and hinged sections. There are a fair number of frames and they run in several directions, which makes hand masking one of the most time-consuming parts of the build.

How to use the mask

Start with the inner side; once the canopy is fitted to the fuselage you can no longer reach it. Wash and degrease the clear part. Release the mask from the sheet with the tip of a scalpel, seat it with tweezers exactly along the frame and press it down with a soft tool all around the edge, especially in the corners. Trim the overhang with a fresh blade in a light pass along the outline. Spray a thin sealing coat of the base color and only then the shade itself, always in several light passes. Peel the masks off once the paint has set, drawing them slowly back over themselves.

Who the set is for

  • Builders of modern combat aircraft in 1:48 scale
  • Modelers who want the frames crisp outside and inside
  • Those building a model with a long tandem cockpit
  • Anyone interested in Czech modeling products

This is an accessory for a kit. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set holds masks for both sides of the clear part. The frames can be sprayed from the inside in the cockpit interior shade and from the outside in the top color, so the glazing looks right from both sides.

Before the glazing is fitted to the fuselage. Once the cockpit is closed you can no longer reach the inner side and cannot get paint there.

Not necessarily. The masks are cut to the shape of the clear parts of a particular kit, and on another mold they may not line up.

It is not. This is a masking accessory on its own; the model and the paints are bought separately.

Last seen

1:48 US 20L Water Jerry Can with Rack
-20 %
Favorite
Firma4949A104/481:48

1:48 US 20L Water Jerry Can with Rack

1:48 US 20 l water jerrycan with rack is a resin accessory, an American 20 l water jerrycan with its rack. A detail part for vehicles and dioramas.
In stock
5.56 €4.45 € You save 1.11 €
1:48 Kfir C2/C7 antennas
-20 %
Favorite
Aires/QuickboostQB485771:48

1:48 Kfir C2/C7 antennas

Quickboost Kfir C2/C7 antennas in 1:48 scale. A resin detail set of antennas for a model of the IAI Kfir fighter in the C2 and C7 versions.
In stock
4.76 €3.81 € You save 0.95 €
Caracal ModelsCAD721331:72

1:72 Grumman OV-1 Mohawk

Caracal Models 1:72 Grumman OV-1 Mohawk is a set of water-slide decals with markings for the OV-1 Mohawk observation aircraft.
In stock
17.56 €
1:72 McDonnell F-15C Eagle
-20 %
Favorite
EduardED3DL720471:72

1:72 McDonnell F-15C Eagle

A decal set for a model of the American McDonnell Douglas F-15C Eagle fighter in 1:72 scale. The extent of the sheet is given in the manufacturer's instructions.
In stock
11.80 €9.44 € You save 2.36 €
Bravo 6B6-350961:35

1:35 US Helo Crew (1)

Bravo 6 1:35 US Helo Crew (1) is a resin set of two unpainted figures of a helicopter crew, issued under the subject Saddlin Up.
In stock
31.96 €
TrumpeterTR015971:35

1:35 JGSDF TYPE 99 HSP

Trumpeter 1:35 JGSDF Type 99 HSP is a plastic kit of the Japanese self-propelled howitzer of the Ground Self-Defense Force.
In stock
29.96 €
New WareNWAM04671:72

1:72 Mask B-52 B/D Stratofortress BASIC (REV/MONO)

The basic New Ware 1:72 masking set for the B-52B and B-52D Stratofortress, BASIC version contains self-adhesive cut masks for spraying a model. An accessory for the build, not a kit.
In stock
5.56 €
BelkitsBELCM1

CUTTING MAT A4 27 X 19

Belkits Cutting Mat A4 is a self-healing cutting mat measuring about 27x19 cm with a printed grid, ideal for the modeling bench.
In stock
3.96 €
Kits-WorldKW721831:72

1:72 Boeing B-17F

A sheet of water-slide decals Kits-World 1:72 Boeing B-17F for supplementing the markings of a model of the Flying Fortress in 1:72 scale.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.