1:48 SIAI Sf-260 Paint Masking for KP Models

The real subject

The SIAI SF-260 is an Italian single-engine low-wing monoplane that made its name as a trainer and sporting aircraft, and a number of air forces use it in armed versions. For a modeler it is typified by a slender fuselage, smooth surfaces and a generously glazed cockpit, where the cleanliness of the transition between the clear parts and the paint decides the result.

What the set contains

The set brings masking pieces for painting a model in 1:48 scale and is intended for the SIAI SF-260 kit from KP Models. With another kit count on the shapes and dimensions of the parts differing, so the masks need not fit. The extent of the set is described in the manufacturer's instructions.

Building and painting tips

The masks go on the model before spraying. First wash and degrease the surface so that the piece holds and the paint does not creep under it. Lay the mask on, press it down mainly around the edge and run a toothpick or a blunt stick along the edge. Apply the paint in thin coats; a heavy layer creates a step at the edge of the mask.

• Remove the mask while the paint has only just dried, not after several days
• Pick the pieces up with tweezers or a pointed blade; do not touch the adhesive side with your fingers
• On glazing, spray the shade of the cockpit interior first and only then the exterior color
• The edge of the mask can be corrected with a fine brush after removal

Who it is for

For modelers who want sharp edges of the color areas and clean glazing without lengthy taping. It will speed the work up wherever cutting the shapes by hand would be lengthy.

The kit, paints and glue are not part of the delivery, unless stated otherwise.