A street lamp in 1:48 scale as an accessory for dioramas and display case scenes. It is supplied unpainted.
Responsibility details are not available.
A street lamp is one of those elements that give a scene its setting and at the same time a sense of scale. Stand it beside a piece of equipment or a figure and the viewer sees at once how large the scene is, while the vertical element breaks up the surface of a base that would otherwise look empty. In a scene it can also serve as an anchor for the composition: a lamp sets the edge of a sidewalk, the corner of a crossroads or the place where the action of the scene happens.
A tall, thin element needs firm fixing. It works well to drill a wire pin into the foot of the lamp, drill a matching hole in the base and seat the lamp into it; the glued face on the foot alone is small and the joint breaks off easily. Wash and degrease the parts before painting, prepare the surface with a base coat and only then paint. A post suits restrained wear, that is a scuffed finish at the foot, a hint of rust at the joints and fine deposits at the top. The material of the parts and the recommended glue are given by the manufacturer; adapt your procedure to their instructions.
For builders of dioramas with an urban or suburban setting and for anyone who wants a model set in a scene rather than on a bare board. It suits equipment as well as figures in 1:48 scale.
A base, a model, figures, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
