29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 Su-27 Flanker front wheel fender - early

Quickboost 1:48 Su-27 Flanker front wheel fender, early version is an accessory set that replaces the coarsely molded plastic part with a fine casting.

Scale1:48
Manufacturer Aires/Quickboost
Product EAN8591111642613

Responsibility details are not available.

4.76 €
3.93 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Front wheel fender of the Su-27 in 1:48 scale, early version

An accessory set from the Quickboost line made by the Czech producer Aires. It is not a model of the aircraft but a replacement for the fender above the nosewheel in the shape matching the early production version. The casting is thinner and more accurately shaped than the plastic part from a kit, on which a parting seam and too thick an edge are usually visible. The fender is clearly visible on a finished model from the front and from below, so replacing it shows at first glance.

The real subject

The Sukhoi Su-27, NATO code name Flanker, is a Soviet heavy twin-engine air superiority fighter. Because its air intakes are placed low under the fuselage, there is a risk of small objects and debris from the runway being drawn in while taxiing. The fender above the nosewheel therefore deflects the stream of flying material and protects the engines from damage. Its shape changed during production and upgrades, so early and later aircraft differ in this detail and a modeler has to choose the form according to the particular machine being represented.

Fitting and painting tips

Wash the casting in lukewarm soapy water because of the mold release agent. Cut the casting block off with a fine saw and level the surface with abrasive paper used wet, and protect your airways when sanding resin. Remove the original plastic part and level the seating surface on the landing gear leg. It is glued with super glue applied on the tip of a wire. Apply a primer before painting, then the light shade of the landing gear parts; the effect is completed by a fine dark wash and light dust soiling of the lower edge.

Who the set is for

  • Builders of Su-27 models in 1:48 scale
  • Modelers building an aircraft of the early production version
  • A quick improvement of a visible detail with no work on the fuselage
  • Competition building, where the accuracy of the landing gear is judged

This is an accessory set, not a complete model. It is supplied unpainted and unassembled; the paints, the glue and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The shape of the fender changed during production and upgrades. Choose the early version for older aircraft and the late one for upgraded ones; the sets cannot be swapped for a particular machine being represented.

No. It is one replacement part of the landing gear. The kit of the aircraft has to be bought separately.

Super glue in the smallest possible amount. Cement for polystyrene does not hold on resin.

It deflects small objects and debris thrown up by the nosewheel, so that the low-set air intakes of the engines do not draw them in.

Last seen

Aires/QuickboostQB488531:48

1:48 Su-27 Flanker front wheel fender - early

Quickboost 1:48 Su-27 Flanker front wheel fender, early version is an accessory set that replaces the coarsely molded plastic part with a fine casting.
In stock
4.76 €
AZ modelAZA70231:72

1:72 Bf 109G/K nose spiral decal

A decal set of propeller spinner spirals for the Bf 109G/K in 1:72 scale from AZ model . It is NOT an airplane model but a set of decals (markings) to complete your own kit. An airplane model is not included.
In stock
4.76 €
EduardED4810441:48

1:48 Mikoyan MiG-15 landing flaps

The Eduard 1:48 Mikoyan MiG-15 landing flaps photo-etched set is an etched accessory for the landing flaps of a 1:48 MiG-15 model. It lets you build the flaps lowered; it is not a kit.
In stock
14.44 €
Aires/QuickboostQB491681:48

1:48 SEPECAT Jaguar GR.1/GR.1a - Upper Pylons with Adapters Airfix

1:48 upper pylons with adapters for the SEPECAT Jaguar GR.1/GR.1a from Quickboost is a resin set of pylons for refining a Jaguar model.
In stock
6.36 €
OWLOWLDS720421:72

1:72 He 219 V-5 DH+PU (late)

1:72 He 219 V-5 DH+PU (late) is an OWL decal sheet for a model of the Heinkel He 219 prototype in its late state, as the machine carried it with the factory code DH+PU.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.