1:48 Swordfish Mk. II

A photo-etched add-on set for the model of the Fairey Swordfish Mk. II carrier torpedo biplane in 1:48 scale.

Scale1:48
Manufacturer Eduard
Product EAN8591111459822

Responsibility details are not available.

27 € 20.24 €
16.73 € without VAT
−25 % You save 6.76 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Fairey Swordfish was a British carrier torpedo biplane that served with the Fleet Air Arm throughout the Second World War, although it already looked obsolete at its start. Open cockpits, fabric covering and a fixed landing gear did not stop it from writing itself into history: the attack on the Italian ships at Taranto and the hit on the rudder of the battleship Bismarck are among the best known actions of naval aviation. The Mk. II version received a lower wing with metal skinning, which could take underwing stores.

What the photo-etched set offers

A biplane is a rewarding subject for an add-on set. Between the wings, in the open cockpits and around the landing gear everything is visible, and every part that comes out too thick in plastic is glaring there. Photo-etched sheet is a few hundredths of a millimeter thick, so once replaced, the edges and the small elements match reality far better. The range of parts and the kit the set is tailored for are given in the manufacturer's instructions.

Building and painting tips

Cut the parts out with a sharp blade on a hard surface, never break them off. Make the bends along the scored lines and finish them in a photo-etch bending tool or between two blades. Glue with a minute amount of super glue; any excess dries white and is hard to remove on a visible spot. Degrease the metal before painting and spray it with a primer. Fit the parts that go into the cockpits before you close up the fuselage, because afterwards you will not reach them.

  • photo-etched add-on set in 1:48 scale
  • for the model of the Fairey Swordfish Mk. II biplane
  • thin metal parts instead of thick plastic ones
  • bends along the scored lines, glued with super glue

Terms of supply

The aircraft kit, paints and glue are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Photo-etched metal parts for the Swordfish Mk. II model in 1:48 scale. The exact range is given in the manufacturer's instructions enclosed with the set.

A minute amount of super glue. Cement for polystyrene has no effect on metal.

The parts going into the cockpits before the fuselage is closed up. The external parts according to the sequence in the instructions, usually at the end of the build.

Yes. Degrease it and spray it with a primer, otherwise the paint rubs off the bare metal during handling.

Last seen

1:48 Swordfish Mk. II-25 %Stock ClearanceFavorite
EduardED499011:48

1:48 Swordfish Mk. II

A photo-etched add-on set for the model of the Fairey Swordfish Mk. II carrier torpedo biplane in 1:48 scale.
Last one!of 6
27 €20.24 € You save 6.76 €
EduardED6340101:32

1:32 P-47D LööK

An accessory from the LööK range for a model of the P-47D Thunderbolt fighter in 1:32 scale. It covers the instrument panel, the most visible feature of the cockpit.
In stock
9 €
Hobby DesignHD03-06031:24

1:24 18' Rays G025 Wheels

Rays G025 rims in 1:24 scale are a supplementary wheel set for builders of Japanese sporting car models.
In stock
19.16 €
Firma4949T012/1.2

1,2mm Phillips screw

Phillips screws with a cross slot in the 1.2 mm size are an add-on set for models of vehicles. They replace a molded head with a part with a real slot, which is fitted into a drilled hole.
In stock
4.76 €
MontexMXSM240081:24

1:24 Hurricane Mk I

Masks for the cockpit glazing of the Hawker Hurricane Mk I fighter in the large 1:24 scale. The package covers the clear part from the outer and the inner side and does not contain national insignia.
In stock
6.36 €
1:35 Leopard 2A6 Tank
-16 %
Favorite
TamiyaTA252071:35

1:35 Leopard 2A6 Tank

A plastic kit of the Leopard 2A6 tank in 1:35 scale from the Japanese maker Tamiya. A modern German main battle tank with a long 120 mm gun.
In stock
49.96 €41.96 € You save 8 €
QuickwheelQW-0731:35

1:35 Comet - Bronco

Quickwheel 1:35 Comet is a road wheel masking set for the British cruiser tank, cut for the Bronco kit.
In stock
9.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.