1:48 Yak-9T TFace

The masks Eduard 1:48 Yak-9T TFace cover the cockpit canopy from the outer as well as the inner side. It is an accessory for painting a model, not a kit.

Scale1:48
Manufacturer Eduard
Product EAN8591111359999

Responsibility details are not available.

10.40 € 7.80 €
6.45 € without VAT
−25 % You save 2.60 €
10 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 Yak-9T TFace: double-sided cockpit masks

The TFace designation means that the set deals with the clear part from both sides: one group of masks belongs on the outside of the canopy, the other on its inner side. The frames can therefore be sprayed in the airframe shade from outside and in the cockpit shade from inside, so the model looks convincing when you look into the cockpit. It is neither a kit nor a photo-etched set, but a pre-cut masking accessory from the Czech manufacturer Eduard. Sticking ready-made shapes onto a clear part is quicker and more accurate than cutting strips out of masking tape, where it is easy to scratch the transparent plastic.

The real subject

The Yak-9T was the antitank version of the Soviet Yakovlev Yak-9 fighter. In the space between the engine banks it received a heavy 37 mm cannon that fired through the hollow propeller shaft. Because of the length of the weapon the cockpit moved back, which is clearly noticeable on the model and among other things changes the shape of the glazing as well. The machine was used against armor and against larger aircraft, where a few hits were enough.

Use and tips

Before masking, wash the clear part in lukewarm water with dish soap and let it dry, as grease from fingers makes a mask hold less well. Lay the masks with tweezers and press the edges down so that paint does not run under them. Stick the inner set on and spray it before you glue the canopy onto the fuselage. Spray thin coats; one heavy coat at the edge of a frame creates a ridge that shows once the mask is lifted off. Lift the mask off soon after it has dried and at a shallow angle.

Who the set is for

  • To builders of the Yak-9T in 1:48 scale who want the cockpit cleanly framed on both sides.
  • To modelers who do not want to cut the frames out of tape.
  • To builders with an open cockpit, where the inner side of the canopy is visible.
  • To everyone who paints with an airbrush and wants crisp edges on the frames.

The set is an accessory for painting a model. It holds neither the kit nor paints.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the set holds masks for both sides of the clear part. You spray the outside in the airframe shade and the inside in the cockpit shade.

It is not. It is a masking accessory that you use when painting a Yak-9T kit in 1:48 scale.

It carried a heavy 37 mm cannon firing through the propeller shaft, and because of the length of the weapon its cockpit was moved back.

Yes, Eduard also keeps an ordinary single-sided mask set for this type. The double-sided version additionally deals with the inside of the canopy.

Last seen

1:48 Yak-9T TFace-25 %Stock ClearanceFavorite
EduardEX9751:48

1:48 Yak-9T TFace

The masks Eduard 1:48 Yak-9T TFace cover the cockpit canopy from the outer as well as the inner side. It is an accessory for painting a model, not a kit.
10 leftof 11
10.40 €7.80 € You save 2.60 €
MINI GTMIGTAD24361:64

1:64 FIGURE SET PAJAMAS PARTY

A set of figures in 1:64 scale on the subject of a pajama party, intended for collector's models and display case scenes.
In stock
17.56 €
Jyakomaru-25 %Stock ClearanceFavorite
BandaiBAN65728

Jyakomaru

A plastic kit from the Gundam world, carried under the name Jyakomaru. It is supplied unassembled.
Last one!
48.76 €36.56 € You save 12.20 €
Macross Plus YF-21-25 %Stock ClearanceFavorite
BandaiBAN66280

Macross Plus YF-21

A kit of a futuristic combat aircraft of the more extensive kind. An intricate surface, interchangeable parts for different configurations and assembly without the need for glue.
Last one!
75.16 €56.36 € You save 18.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.