1:72 Grumman A-6E TRAM Intruder

An Eduard masking set in 1:72 scale for a model of the Grumman A-6E TRAM Intruder carrier-borne attack aircraft. The pieces are cut to finished shapes in production; they only have to be stuck on according to the plan.

Scale1:72
Manufacturer Eduard
Product EAN7591991248649

Responsibility details are not available.

6.80 €
5.62 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Grumman A-6E Intruder is an American carrier-borne attack aircraft meant for use in all weather and at night. The crew consists of a pilot and a navigator seated side by side under a common canopy, the fuselage is short and massive, and the straight wing has folding tips for parking on the deck of a carrier. The designation TRAM belongs to the sensor turret under the nose, which holds an infrared camera and a laser; with it the aircraft found and hit a target accurately even in the dark.

What the set contains

A masking set in 1:72 scale from Eduard's production. The individual pieces are cut to finished shapes in production, so there is no tracing of frames and no laborious cutting of curves out of tape. The plan in the package shows where each piece belongs. The masks are shaped for a particular kit; which one the manufacturer has in mind is given in the instructions for the set, so go by the manufacturer's part number when ordering.

Building and painting tips

First wash the glazing and let it dry completely, so that the mask holds and no fingerprints are left under it. Stick it on before spraying and press the edges home carefully with a toothpick: it is precisely under an unpressed edge that paint creeps. Spray several light coats rather than one heavy one. As soon as the paint has dried to the touch, lift a corner of the mask with a sharp point and draw it off at an angle toward the edge.

Who it is for

For a modeler who is building the Intruder in 1:72 scale and wants crisp transitions of the frames without cutting them by hand. The package holds masking sheets according to the manufacturer's listing; the kit, the paints and the glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Masking sheets with pre-cut pieces and a plan of their placement. The kit, the paints and the glue are not part of the delivery, unless stated otherwise.

The masks are shaped for a particular kit. The name does not give it, so go by the manufacturer's part number CX689 and by the manufacturer's instructions.

Before spraying, onto clean and dry glazing. Press the edges home with a toothpick so that paint does not creep under them, and lift the mask as soon as the paint has dried to the touch.

Expect one use. A piece that has been lifted loses its grip and need not seat in its original place again.

Last seen

EduardCX6891:72

1:72 Grumman A-6E TRAM Intruder

An Eduard masking set in 1:72 scale for a model of the Grumman A-6E TRAM Intruder carrier-borne attack aircraft. The pieces are cut to finished shapes in production; they only have to be stuck on according to the plan.
In stock
6.80 €
SX-ArtSXA481061:48

1:48 Mistel S-1 (ICM)

SX-Art masks Mistel S-1 1:48 are self-adhesive masks for the glazing of a model of the Mistel S-1 training combination. The target kit: ICM.
In stock
7.96 €
Exotic DecalsEXOT480261:48

1:48 Italian Gustavs over Sicily #2 - Bf-109 G in Regia Aeronautica (Part 2)

Exotic Decals 1:48 Italian Gustavs over Sicily No. 2 is a decal sheet with markings for Bf 109G aircraft of the Regia Aeronautica over Sicily, the second part.
In stock
11.96 €
New WareNWAM11761:48

1:48 MiG-29K BASIC kabuki masks

1:48 MiG-29K BASIC kabuki masks is the basic New Ware mask set for the MiG-29K carrier-based fighter in 1:48 scale.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.