Photo-etched metal parts in 1:72 scale for a kit of the Grumman E-2C Hawkeye carrier-borne early warning aircraft.
Responsibility details are not available.
The Grumman E-2C Hawkeye is a carrier-borne early warning aircraft that carries a large rotating radar disc above the fuselage. Because of it the machine was given an unusual tail arrangement with several vertical fin surfaces, so that it would fit under the low ceilings of the hangars on an aircraft carrier and still have enough effect. The high-set wing folds back along the fuselage for parking.
Photo-etched metal parts for a kit of this type in 1:72 scale. On an aircraft with so many grilles, flaps and small platforms, thin sheet comes into its own precisely where a plastic part would look coarse. Which parts the fret carries and where they are fitted on the model is described in the manufacturer's instructions.
Leave the fret whole and cut off it, step by step, only what you are gluing at the moment. Cut with a sharp blade on a hard surface and sand the remains of the attachment with fine paper. For the bends a bending tool is best, otherwise the smooth jaws of pliers. Bond the metal with super glue applied onto the plastic, not onto the part itself. Before painting, degrease the sheet and spray on a primer, otherwise the shade will rub off during handling alone. Put the small features into a dish, so that they do not spring off the desk. Go through the instructions in full before the build, because parts heading inside the fuselage have to be fitted before its halves are glued together.
It will be appreciated by a modeler who wants crisp, thin detail even in a small scale and does not mind working with tweezers. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!