1:72 MiG-21 BIS / MF / MFN - Basic Kabukli Masks (for Eduard Kits)

The real subject

The MiG-21 is among the most widespread supersonic fighters ever and you know it by its delta wing and the circular nose air intake with a cone in the middle. The MF version is one of the most numerous, the MFN is its later rework and the bis represents the last production development branch. The canopy glazing of all three is fairly broken up, with a fixed windscreen and a hinged section, so masking takes time.

Which kits it fits

The masks are cut for MiG-21 kits from Eduard in 1:72 scale, as the name of the item states directly. The set comes in two scopes; this is the basic one, while the other variant covers more pieces. The advantage over working with tape by hand stays the same: the edge of the frame comes out straight, equally wide on both sides of the model and it does not shift anywhere.

How to use the masks

• First wash the clear parts, degrease them and let them dry perfectly.
• Lift the masks off the sheet with tweezers and press the edges down with a blunt tip.
• Apply them before spraying, not onto a finished coat.
• Lay the paint down in thin coats, as a heavy application will creep under the edge.
• Spray the canopy frame with the interior color first and only then with the outer shade.
• Take the masks off shortly after the paint has dried, pulling at an angle to the surface.

Terms of supply

What is supplied are the masks themselves. The kit, paints, glue and tools are not included in the package, unless stated otherwise. Which pieces the set covers and exactly where they belong is given in the instructions from the manufacturer.