1:35 GAZ-66 Double-sided painting mask (ZVE)

The double-sided masking set 1:35 GAZ-66 from the SX-Art brand covers the cab glazing of the Soviet off-road truck from the outside and from the inside.

Scale1:35
Manufacturer SX-Art
Product EAN8591111870955

Responsibility details are not available.

9.16 €
7.57 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A double-sided masking set for the glazing of the GAZ-66 in 1:35 scale

The self-adhesive masks from the SX-Art brand cover the glazed areas of the cab of the Soviet off-road truck. The designation double-sided means that the sheet carries parts for the outer and the inner side of the glass: the frames then hold the right shade even when seen into the cab, and paint does not get under the edge from inside either.

The truck the masks belong to

The GAZ-66 is a two-ton 4x4 that the Gorky Automobile Plant put into production in 1964. The cab set over the engine shortened the front overhang and gave the vehicle the ability to get through where longer chassis stuck fast. That is exactly why the airborne units took to it, dropping it on platforms. It carried workshops, radio stations and troops, and in the armies of the Eastern Bloc it stayed in service for decades.

How to work with the masks

Separate the parts with the tip of a scalpel and carry them with tweezers, so that the adhesive layer does not pick up fingerprints. Once they are stuck on, run a wooden toothpick along the edges; that draws the film onto the frame and no seepage arises. Spray several light coats; one heavy coat creates a step on the edge that shows once it is removed. The best moment for taking them off comes when the paint has set but is not yet fully cured.

Who the set is worth it for

  • builders of Soviet and Russian equipment in 1:35 scale
  • anyone for whom trimming strips from tape by hand takes more time than the build itself
  • diorama modelers where the cab is visible through open doors
  • anyone who does not yet dare attempt a sharp paint transition

This is an aid for painting a plastic kit; paints and glue are not in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Besides the parts for the outer side of the glazing it also holds shapes for its back, so the frame can be painted in the interior shade and in the body shade alike.

The film is intended specifically for modeling use and leaves no residue once removed. Take the mask off shortly after the paint has dried, not after several days.

No, it is masking film only. The kit, paints and glue have to be obtained separately.

Count on a single use. Once peeled off, the film loses the precise adhesion that matters so much on thin frames.

Last seen

SX-ArtSXA352041:35

1:35 GAZ-66 Double-sided painting mask (ZVE)

The double-sided masking set 1:35 GAZ-66 from the SX-Art brand covers the cab glazing of the Soviet off-road truck from the outside and from the inside.
In stock
9.16 €
SX-ArtSXA351961:35

1:35 M1070 Truck Tractor Painting Mask (HOBBYB)

A cut SX-Art painting mask for the M1070 heavy tractor in 1:35 scale . The self-adhesive shapes cover the glazing and the lights for the duration of the spraying and are then taken off.
In stock
9.16 €
SX-ArtSXA351931:35

1:35 Tinting film Patriot Abschussrampe auf 15t

Tint film 1:35 Patriot on the 15t chassis from SX-Art for a realistic tinting of the glazing, optics and lights of a model of the Patriot system launcher.
In stock
7.16 €
Green Stuff WorldGSW9959

Display Box of Refillable Markers 1 - Detail (x30)

Green Stuff World Display Box of Refillable Markers 1 - Detail (x30) is a large pack of thirty refillable fine-tip markers that the modeler fills with their own paint.
In stock
46.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.