Replacement wheels with tires of the Firestone pattern for the American heavy wrecker Ward LaFrance M1, 1:35 scale. The fourth part of the upgrade line, resin castings with a faithful tread pattern and deflection of the tire.
Responsibility details are not available.
On a heavy wrecker it is the tires in particular that even a non-modeler notices. American machines ran on tires from several makers and each had a different tread pattern, a different sidewall profile and a different depth of pattern. This set brings wheels with tires of the Firestone pattern, a different variant from the sister part of the line with the coarse transverse bar grip pattern.
The six-wheeled wrecker with all-wheel drive was among the hardest working machines of the American army. It pulled tanks out of the mud, lifted engines with its crane and hauled away to the workshops what would otherwise have stayed on the battlefield. That is precisely why it appears in period photographs differently clogged every time and with wheels that carry the marks of hard terrain.
The castings are cleaned up on the seating surface of the rim, not on the tread. It is a good idea to drill the center of the wheel out, or at least to mark it, so that the hub does not sit crookedly. Start the painting with a dark gray, not with black; a purely black tire in scale looks unnaturally heavy. Add the dust on the sidewalls with pigment once the varnish has dried. Once everything is seated, finally check that the vehicle sits on all its supporting points, otherwise the finished model will visibly limp.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!