A turned 152 mm barrel for a model of the Russian Koalitsiya-SV self-propelled howitzer, 1:35 scale.
Responsibility details are not available.
The Koalitsiya-SV self-propelled howitzer was shown to the public in the middle of the last decade and drew attention with its unmanned turret: the crew sits in the hull and loading is handled by an autoloader. Thanks to that, the 152 mm weapon can fire faster than older systems were used to, and it loads even at high elevations.
A plastic barrel is made up of two halves, so a seam runs along its whole length, and it is hard to sand down without damaging the rings on the barrel. The metal part is turned in one piece, perfectly straight and with a drilled-out muzzle. An open muzzle is exactly the detail everyone notices, because you cannot look into a solid plastic tube. A metal barrel also holds its shape better; on long weapons a plastic one sags under its own weight in time.
Take the plastic barrel off, clean out the opening in the mantlet and slide the part in dry. Metal has weight, so reinforce the joint with a glue that takes longer to set and let the model dry with the barrel pointing upwards. Before painting, the metal must be degreased and coated with a primer for metals, otherwise the finish chips easily. Any step between the metal and the plastic at the root of the barrel can be hidden with a thin strip of modeling putty.
It pays to leave a slight difference of shade between the barrel and the hull. A barrel heats up when firing, a different kind of dust settles on it and near the muzzle the surface tends to be darker from propellant residue. A fine transition toward the muzzle turns the model into a machine that really fired.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!