Customize Material (3D Metallic Seal)

A sheet of self-adhesive elements with a metallic gloss surface for accentuating details on kits. The shapes are popped out and transferred straight onto the plastic part, so a metallic look is achieved without painting and without masking the surroundings.

Manufacturer Bandai
Product EAN5591111248648

Responsibility details are not available.

8.76 € 6.56 €
5.42 € without VAT
−25 % You save 2.20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A metallic sheen without an airbrush

The sheet from the Customize Material line carries small self-adhesive shapes covered with a high-gloss metallic layer. Rings, small rectangles, wedges and narrow strips are pre-cut in the film so that all you do is pop them out and transfer them onto a part. The model then has places that reflect light differently from the surrounding plastic: they read as polished sheet metal, a hinge or a machine component hidden under armor.

A procedure that has proved itself

Pick the elements up with tweezers or the tip of a scalpel; under fingers the glossy surface smears and the print cannot be got off it again. The base must be dry and degreased, ideally smooth: on a coarse texture the film does not adhere over its whole area and the corners lift over time. Once laid in place, press the element down with a soft wooden stick, always from the center toward the edges, so no air is left under it.

Where it pays off most

The greatest saving of work comes where painting a small detail in would mean covering up the whole surroundings: in the recesses of panels, on nozzle mouths, on screw heads or on the edges of a frame. Because it is a thin film, it will take a bend over a slightly curved surface, but it will not bridge a sharp edge: there it is more sensible to split the shape into two smaller pieces and place the join in the corner.

Storage and leftovers

The package holds the sheet itself; nothing else for the build is hidden in it. Overcoating with a matte varnish is not recommended: it would suppress the very reflection the elements are used for.

Leave the rest of the sheet on its backing, store it flat and out of direct sunlight. A film that has rippled or been warmed through transfers considerably worse, and the adhesive layer loses strength at the edges.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The glossy layer is finished from the factory and any coat over it will suppress the reflection. Only the surrounding plastic is varnished, and that before they are applied.

On a slight curve it does, as long as you press it down from the center outwards. Over a sharp edge it will not adhere reliably: in such a place use two smaller shapes side by side.

Shortly after laying it down, and very carefully, yes, but repeated handling ruins the adhesive layer. Better to try the exact position dry first.

There is not. It is a material for altering parts that the builder obtains separately.

Last seen

Customize Material (3D Metallic Seal)-25 %Stock ClearanceFavorite
BandaiBAN65018

Customize Material (3D Metallic Seal)

A sheet of self-adhesive elements with a metallic gloss surface for accentuating details on kits. The shapes are popped out and transferred straight onto the plastic part, so a metallic look is achieved without painting and without masking the surroundings.
Last one!
8.76 €6.56 € You save 2.20 €
30MS OPTION HAIR STYLE & FACE PARTS SET (HIORI KAZANO/MEGURU HACHIMIY-25 %Stock ClearanceFavorite
BandaiBAN65704

30MS OPTION HAIR STYLE & FACE PARTS SET (HIORI KAZANO/MEGURU HACHIMIY

An add-on set of hairstyle and face parts for the figure models of the 30MS series from the Bandai brand, tied to a pair of particular characters.
Last one!
47.96 €35.96 € You save 12 €
OmaskOMK570481:72

1:72 TIE Advanced x1 double-sided mask (for Bandai/Revell)

Omask TIE Advanced x1 1:72 - a double-sided masking set makes it possible to spray the glazing frames and the panels of the advanced TIE fighter cleanly from both sides. The target kits are Bandai and Revell.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.