1:72 A-4 Skyhawk ladder is a photo-etched boarding ladder for the A-4 Skyhawk carrier-based attack aircraft in 1:72 scale from the Czech brand Brengun. A small detail that brings a model to life on a stand and in a diorama.
Responsibility details are not available.
This accessory set from the Czech brand Brengun contains an etched metal boarding ladder of the kind that leaned against the cockpit of the A-4 Skyhawk attack aircraft. It is not an aircraft model in its own right but a small thing that can turn a statically posed model into a living scene - a parked machine with an open canopy and a ladder in place tells a story. Thin etched metal allows a far finer rendering of the rungs and the side rails than injection-molded plastic could manage.
The Douglas A-4 Skyhawk was a light carrier-based attack aircraft that flew from the middle of the 1950s. Thanks to its compact delta wing it did not even need folding wings on aircraft carriers, and for its agility and reliability it earned the nickname Scooter. It fought intensively over Vietnam and served with many other air forces. A boarding ladder was commonly used on deck for the pilot to climb into the cockpit - exactly the sight this set makes it possible to render faithfully.
Separate the parts from the fret with a sharp knife on a hard surface and make the bends with tweezers or a bender along the lines marked. Glue with super glue in small amounts, ideally applied with a pin. Before painting, degrease the metal and give it a primer coat, or the paint will hold badly.
This is an accessory set, not an aircraft model in its own right. It is supplied unassembled and unpainted; glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!