1:72 Alouette III mask (for Heller)

Omask 1:72 Alouette III is a masking set for the glazing and glazed areas of a model of the light Alouette III helicopter in 1:72 scale. It is not a model but an aid for painting.

Scale1:72
Manufacturer Omask
Product EAN8591111000000

Responsibility details are not available.

5.56 €
4.60 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Omask 1:72 Alouette III, a masking set

A set of cut masks for a model of the Aérospatiale Alouette III helicopter in 1:72 scale. The masks cover the glazed areas before spraying, so that once they are peeled off the cabin frames are left crisply separated from the transparent panels. On the Alouette III that matters more than on other types: the cabin is formed by a large glass bubble with a dense network of frames, which is slow to mask by hand with tape and where an uneven edge is easily produced. The set is cut for the particular kit given on the box, so check before buying that it matches the model you are building; masks from another kit need not fit it.

The real subject

The Alouette III is a French light multipurpose helicopter with a turboshaft engine that followed on from the successful Alouette II and first flew at the end of the 1950s. It carried a pilot and several other people, had excellent performance at high altitudes and, thanks to its simple maintenance, spread to dozens of countries. It was used for rescue and mountain operations, for observation, liaison, training and for police duties, and it was also built under license outside France. The extensive cabin glazing is its most characteristic feature and at the same time the main modeling challenge.

How to use the masks

First wash the clear parts and let them dry thoroughly, so that the mask holds over the whole area. Lift the mask off its backing with pointed tweezers or the edge of a scalpel, lay it down and press it with a soft stick; it is pressure around the perimeter that decides how clean the edge is. Spray the paint in thin coats; a heavy coat runs underneath more easily than several light passes. It pays to spray the interior shade of the frames first and only then the exterior color. Remove the masks while the finish is fresh, not after it has cured fully.

Who the set is for

  • Modelers building the Alouette III in 1:72 scale.
  • Builders who want crisp cabin frames without cutting tape by hand.
  • Anyone after a saving of time on types with extensive glazing.
  • Anyone who sprays with an airbrush and wants a clean paint transition.

This is a masking set, not a model of a helicopter. The kit and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masks for the clear parts, which you use while painting a kit you already own.

Not necessarily. The masks are cut for the particular kit given on the box, so check that it matches before ordering.

The exact number of masks is stated on the box.

Before the paint has fully cured. From a fully cured finish the edge peels less readily and can tear.

Last seen

OmaskOMK570141:72

1:72 Alouette III mask (for Heller)

Omask 1:72 Alouette III is a masking set for the glazing and glazed areas of a model of the light Alouette III helicopter in 1:72 scale. It is not a model but an aid for painting.
In stock
5.56 €
Kits-WorldKW480101:48

1:48 B17F Flying Fortress

Two B-17F bombers documented by name including serial numbers and squadron codes, printed for 1:48 scale.
In stock
10.36 €
RT-DioramaRT355801:35

1:35 Highway bridge for signs No.1

1:35 Highway bridge for signs No.1 is a diorama element in 1:35 scale - a gantry arching over the roadway that carries traffic signs. It is not a kit of a vehicle but an accessory for a road scene.
In stock
17.96 €
1:35 Panzer I Ausf.B Tools Clamps-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-80961:35

1:35 Panzer I Ausf.B Tools Clamps

Tool clamps for the Panzer I Ausf. B in 1:35 scale are a resin accessory set from AMMO of Mig Jimenez. They replace the coarse plastic brackets that hold the pioneer tools on the vehicle.
8 leftof 11
8.76 €6.56 € You save 2.20 €
HatakaHTK-BS67

Modern US Army and USMC AFV Paint Set

Eight shades for current American armored vehicles: the three-tone NATO camouflage, desert tones, temporary winter white and the greenish color of the crew compartments.
In stock
16.76 €
AberABRPP02

Engrave plate (88 x 57mm) - pattern 02

Aber Engrave plate (88 x 57 mm) – pattern 02 is a photo-etched brass embossing plate on which a modeler creates a textured surface in thin foil. It is neither a kit nor a finished part but a tool for repeated use.
In stock
6.60 €
Red Fox StudioRFSQS-320831:32

1:32 F-5F Tiger II (for Kitty Hawk Kit)

1:32 F-5F Tiger II is a 3D printed and pre-painted set of cockpit panels on decal paper from Red Fox Studio. An accessory for the two-seat version in a kit in 1:32 scale. Intended for the Kitty Hawk kit.
In stock
30.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.