1:72 Antonov An-8 NATO code CAMP - VSU TG-16

The Antonov An-8 in 1:72 scale is a plastic kit of the twin-engine turboprop transport aircraft from the maker Amodel, in the arrangement with an auxiliary power unit. The model is supplied unassembled and unpainted.

Scale1:72
Manufacturer Amodel
Product EAN8591111000000

Responsibility details are not available.

55.96 € 41.96 €
34.68 € without VAT
−25 % You save 14 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Antonov An-8 1:72 - an Amodel plastic kit

The kit captures the twin-engine turboprop transport aircraft An-8, known in the code designation of the North Atlantic Alliance as Camp. According to the name this is the arrangement with an auxiliary power unit, that is with an auxiliary turbine unit for starting the engines and powering the systems on the ground, which shows on the aircraft in a different installation and shape of the cover. Amodel is among the makers of short runs, so it offers subjects unavailable elsewhere, but more hand work goes with the build.

The real subject

The An-8 is a military transport aircraft with a high-mounted wing, two turboprop engines and a rear end adapted for a cargo ramp. The layout with a beam-mounted tail and a ramp allowed bulky cargo to be loaded straight from ground level and dropped in flight. The aircraft arose in the second half of the 1950s and became the design basis for the later family of turboprop transport machines of the same design bureau.

Building and painting tips

On short-run kits a dry fit is fundamental. Count on cleaning the parts of molding lugs, on fine-tuning the fit and on filling the joints, above all where the wing and the engine nacelles meet the fuselage. A high-mounted wing is sensitive to the dihedral angle, so check the seating before gluing and reinforce the joint from the inside. Mask the cabin glazing before painting. The large areas of the fuselage are best sprayed with an airbrush over a base coat, which will reveal any remaining scratches. Use a gloss intermediate varnish before laying the decals on, unify the surface at the end with a matte or semi-gloss varnish and suggest the grime of service around the engines and the landing gear only sparingly.

Who the model is for

  • For more experienced modelers with experience of short runs.
  • For collectors of turboprop transport aircraft.
  • For builders who collect the type line of one design bureau.
  • For anyone interested in less usual variants of well known machines.

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the code designation that the North Atlantic Alliance assigned to the type for unambiguous identification.

It is an auxiliary turbine unit which on the ground powers the onboard systems and allows the main engines to be started without a ground source.

Rather not. It is a short-run kit, where cleaning the parts, dry fitting and filling the joints have to be counted on.

The number of parts and the exact contents of the package are given on the box and in the instructions of the maker. Check the contents against them once it has been delivered.

Last seen

1:72 Antonov An-8 NATO code CAMP - VSU TG-16-25 %Stock ClearanceFavorite
AmodelAMOD72141-11:72

1:72 Antonov An-8 NATO code CAMP - VSU TG-16

The Antonov An-8 in 1:72 scale is a plastic kit of the twin-engine turboprop transport aircraft from the maker Amodel, in the arrangement with an auxiliary power unit. The model is supplied unassembled and unpainted.
Last one!of 2
55.96 €41.96 € You save 14 €
EduardED6322061:32

1:32 Bf 109K-4 Wheels for Kotare

Eduard Bf 109K-4 Wheels, 1:32 is a resin and 3D-printed set of replacement landing gear wheels for the Messerschmitt Bf 109K-4 kit in 1:32 scale from Kotare. This is not an aircraft model, but a detail accessory that replaces the plastic wheels from the box.
In stock
11.80 €
Voyager ModelPE3511731:35

1:35 WWII Sd.Kfz.173 Jagdpanther G2 Version Basic Upgrade set(For MENG TS-047)

The Voyager Model 1:35 basic photo-etched set for the Jagdpanther G2 refines the detail of a model of the German tank destroyer.
In stock
25.56 €
BrengunBRL1441231:144

1:144 Bachem Ba-349 Natter (Brengun kit)

1:144 Bachem Ba-349 Natter is a photo-etched accessory set for a kit of this machine that you have already bought, not a model. It adds the fine metal detail that a plastic part cannot carry in this scale.
In stock
7.56 €
New WareNWAM06101:72

1:72 Mig-25 RBT EXPERT (REV,HAS)

A set of masks for the MiG-25RBT in 1:72 scale in the Expert variant from the manufacturer New Ware, the fullest grade of the line for a clean spray of the cabin, the wheels and further airframe details of the reconnaissance version.
In stock
6.76 €
U-STARUA91370

Double edged cutting pliers (for teenagers)

U-STAR cutting pliers are modeling nippers for separating parts from the sprues, arranged for comfortable work by less experienced modelers too.
In stock
23.56 €
ZvezdaZV74221:100

1:100 US 155-mm Self-Propelled Howitzer M-109A2

The Zvezda 1:100 M-109A2 is a snap-fit kit of the American 155 mm self-propelled howitzer in a small scale, for wargaming and for collectors.
In stock
8.76 €
EduardED64810611:48

1:48 P-40 exhaust stacks fishtail PRINT

Eduard 1:48 P-40 fishtail exhaust stacks (PRINT) is a set of 3D printed replacement fishtail exhausts for models of the Curtiss P-40 fighter in 1:48 scale. It is not a model of an aircraft but a detail accessory to a plastic kit.
In stock
6 €
ReskitRSU48-02651:48

1:48 Messerschmitt Bf-109E exhaust

Messerschmitt Bf-109E exhausts 1:48 from the brand Reskit are a 3D-printed resin detail set that replaces the exhaust stacks on a plastic model.
In stock
5.96 €
Dynamo-ModelsDNM350811:35

1:35 40’ BEF Infantry On The March No.2

A marching British infantryman 1940, 1:35 . The second number of the line, with a shorter stride and a slightly forward-leaning torso. From the Dynamo-Models range.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.