F-16C Fighting Falcon cockpit set 1:72 from Aires - a resin detail set for the cockpit of the F-16C fighter for a build in 1:72 scale.
Responsibility details are not available.
A resin cockpit detail set from Aires in 1:72 scale. It is not an airplane model but a complete improvement of the cockpit made for a plastic kit of the F-16C Fighting Falcon fighter. The set usually takes in the cockpit tub, the instrument panel, the side panels and the ejection seat, all faithfully rendered. Photo-etched parts and instrument decals tend to be included as well. The set is meant for experienced modelers.
The F-16C Fighting Falcon is a single-seat, single-engine multirole fighter with a characteristic bubble canopy that gives the pilot an excellent view. The roomy cockpit with its large glazing shows clearly under the clear canopy, so working it out in detail has a great effect on the finished model.
Wash the parts to remove the mold release agent, cut off the casting blocks and sand with your airways protected. Bond the resin with super glue (cyanoacrylate). Paint the cockpit in the base shade, bring the instruments out with a dry brush and a wash, or use the decals supplied. Check the fit before the fuselage is closed.
This is a detail accessory, not a complete model. It is supplied unpainted and unassembled, without the target kit, glue or paints.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
