Replacement heads for figures in 1:72 scale, the variant marked with the letter B. They serve to bring kit figures to life, so that the same faces do not repeat in one scene.
Responsibility details are not available.
Replacement heads for figures in 1:72 scale, offered as variant B. The letter in the designation distinguishes one of the variants inside the line; what exactly it contains, that is how many heads and with what headgear, is given in the manufacturer's instructions. It is an accessory for figures; a figure on its own does not arise from it.
The head decides how a figure comes across. Kit figures tend to have the same face and the same carriage of the head throughout a set, so in a larger group it is quickly noticed that the same part repeats. Exchanging the head is the simplest way to give every figure its own expression, to turn the gaze elsewhere and to unify a group according to what each one wears on its head.
Cut the original head off at the level of the neck with a sharp blade or a fine saw and level the surface. It pays off to drill a hole into the body and into the new head with a micro drill and to reinforce the joint with a piece of wire, as otherwise the small part works loose during handling. It is glued with cyanoacrylate glue (super glue). Wash and degrease the parts before painting and apply a thin layer of primer. In 1:72 scale a head measures barely two millimeters, so work with tweezers over a surface with a raised edge.
Figures, a model, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
