A photo-etched metal set for a model of the Lockheed Martin F-16C Block 50 aircraft in the version commonly designated CJ, in 1:72 scale.
Responsibility details are not available.
The package holds a thin metal fret, from which you cut out the individual parts and fit them to the kit. The set is cut for a model of the F-16 in the Block 50 version in 1:72 scale. Which particular parts of the machine the fret covers is shown by the manufacturer's instructions supplied with the set; follow them when fitting the parts as well.
The F-16 is a single-seat light multirole combat aircraft. The designation CJ became established among modelers and in the literature for Block 50 machines equipped for the suppression of enemy air defenses; in official nomenclature it is still the F-16C. Block 50 is a production block, not a separate type, and it differs from the older blocks in equipment and external details. It is exactly these small things that are least apparent on a kit in a small scale, and that is why a photo-etched accessory pays off.
Separate the parts with a sharp blade on a hard surface, not by twisting. Make the bends over a sharp edge or in a bending tool. Wash and degrease the metal before painting and use a primer intended for metal surfaces. They are glued with cyanoacrylate glue applied in a minute amount; PVA glue does not hold on metal. In 1:72 scale the parts are very small, so have tweezers with fine tips ready and work over a surface with a raised edge, so that a part that springs away is not lost.
The set serves to complete a kit. The model itself, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
