The New Ware 1:72 Tu-22M Backfire EXPERT mask is the widest grade of the cut mask set for the model of the bomber Tu-22M in 1:72 scale.
Responsibility details are not available.
A cut self-adhesive mask for the model of the bomber Tu-22M in 1:72 scale in the highest equipment grade. Compared with the basic version it has a markedly wider extent, so with one package you cover more masked surfaces of the model than just the canopy glazing.
A higher grade makes sense when you plan to spray elements that would otherwise be handled with decals or with tape cut by hand. Typically these are surfaces where a decal adapts badly to the shape or where its carrier film would show. Getting a wider set makes less sense, by contrast, if you only want to mask the cockpit quickly; the basic version is enough for that. The difference between the grades therefore corresponds to a difference in extent, not in the quality of the material.
Before applying the mask, degrease the surface with alcohol and let it dry completely. Lay the paint on thinly and let it set between coats; with wider sets it pays to spray in sections and to keep checking the edges. With dark shades over a light base, spray rather more thin coats, because one deep application will creep under the edge almost every time. Lift the mask off while it is still fresh, that is shortly after spraying, and raise the corners with a toothpick rather than a metal point.
This is a masking accessory, not a kit. The model, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
