20% OFF Sale Until Wednesday! 

MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS

 Sale Ends Wednesday, November 11, 2026!

1:72 Me-210A / Me-210 / Me-210 Tankbuster / Do-17E / Do-17F

1:72 Me-210A / Me-210 / Me-210 Tankbuster / Do-17E / Do-17F

9.16 €
Add to Cart

1:72 Me-210A / Me-210 / Me-210 Tankbuster / Do-17E / Do-17F

1:72 decals for the Me-210A, Me-210, Me-210 Tankbuster, Do-17E and Do-17F from the Czech manufacturer Bilek are a more extensive sheet of markings covering several types and versions at once.

Scale1:72
Manufacturer Bílek
Product EAN8591111000000

Responsibility details are not available.

9.16 €
7.57 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 decals for the Me-210A, Me-210, Me-210 Tankbuster, Do-17E and Do-17F (Bilek)

This item is a sheet of wet decals in 1:72 scale from the Czech manufacturer Bilek. Against the usual single-type sets it covers, according to the name, several machines and versions at once, so it is a fuller sheet for a modeler building more than one kit from the same field. The package holds no kit and no plastic parts. How the markings are divided between the individual types and how many schemes there are is stated on the box and in the instructions for the set; check the contents against them.

The real subjects

The Me-210 is a twin-engine all-metal multirole aircraft with two crew members, conceived as the successor to an older heavy twin; the A series guises differ from one another in armament and equipment, while the variant designated tankbuster was aimed at attacks on ground targets. The Do-17 is a twin-engine bomber and reconnaissance aircraft with a markedly slender fuselage, which is what earned it its nickname; the early E and F versions differ above all in the equipment for bombing and reconnaissance duties. All the types named come from German production of the 1930s and 1940s.

Applying the decals

Varnish the surface with a gloss clear coat compatible with the paint used. Soak the decal briefly in warm water, let it release on paper, move it across with a soft brush and draw off the excess water. Use a decal softener on uneven surfaces and engraved lines. Because the sheet covers more than one type, we recommend marking out beforehand which elements belong to which model, so that you do not use up markings intended for another build. Once dry, unify the surface with a matte varnish.

Who the set is for

  • Modelers who build more than one twin-engine type in 1:72 scale
  • Builders with older kits whose original decals are unusable
  • Anyone after a wider choice of markings in a single package
  • More experienced modelers who work with softeners and with varnishing under decals

This is an accessory — a sheet of decals. The kit, paints, glue and varnishes are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a sheet of decals; the kits and the paints have to be bought separately.

How the markings are divided between the individual types is stated in the instructions for the set. Lay out the contents of the sheet accordingly before you apply the first element.

It covers several types and versions according to the name, so there is more on it. The exact extent of the sheet is stated on the box.

The scale is common to all, but the breakdown of parts differs between manufacturers. Lay the sheet against the model and check the position of the markings beforehand.

Last seen

BílekBI729611:72

1:72 Me-210A / Me-210 / Me-210 Tankbuster / Do-17E / Do-17F

1:72 decals for the Me-210A, Me-210, Me-210 Tankbuster, Do-17E and Do-17F from the Czech manufacturer Bilek are a more extensive sheet of markings covering several types and versions at once.
In stock
9.16 €
Red Fox StudioRFSQS-321481:32

1:32 Hawker Hurricane Mk.IIb (For Revell Kit)

The color 3D instrument panel Hawker Hurricane Mk.IIb in 1:32 scale from the maker Red Fox Studio, a pre-painted cockpit accessory for the Revell kit, not a standalone model.
In stock
19.56 €
Sets of 5 Blades – #11 Fine point blades
-20 %
Favorite
VallejoVALT06003

Sets of 5 Blades – #11 Fine point blades

Vallejo - set of 5 spare No. 11 blades with a sharp pointed tip. The most widely used modeling blade type, suitable for most scalpels with a No. 1 handle.
In stock
2.76 €2.21 € You save 0.55 €
AML DecalsAMLM490161:48

1:48 Hawker Tempest Mk.V (WWII) camouflage mask

AML 1:48 Hawker Tempest Mk.V (WWII) paint masks for spraying the upper camouflage of this fighter faithfully with an airbrush.
In stock
3.56 €
AML DecalsAMLC480261:48

1:48 Soviet Aces in Lavochkin La-5F´s. Part I

Decals Soviet Aces in Lavochkin La-5F, Part I, 1:48 are a set of wet decals for models of the Lavochkin La-5F fighter in 1:48 scale.
In stock
5.16 €
1:35 Upgrade set for Pz.IV Ausf.G/ H-25 %Stock ClearanceFavorite
RYE FIELD MODELRM20091:35

1:35 Upgrade set for Pz.IV Ausf.G/ H

An accessory set for the Pz.Kpfw.IV Ausf.G and H in 1:35 scale from Rye Field Model is not a kit of the tank but a set of parts for refining a model already purchased.
8 leftof 10
19.96 €14.96 € You save 5 €
AiresAIR48361:48

1:48 F-104S/G Starfighter exhaust nozzle

Aires 1:48 F-104S/G Starfighter exhaust nozzle is a resin replacement for the exhaust nozzle of a Starfighter kit in 1:48 scale. It is a detail accessory, not a model of an aircraft.
In stock
25.60 €
1:48 F-16C Block 42 from 2006 cockpit 3D-Printed-25 %Stock ClearanceFavorite
EduardED6489711:48

1:48 F-16C Block 42 from 2006 cockpit 3D-Printed

1:48 F-16C Block 42 from 2006 cockpit 3D-Printed from Eduard is a 3D printed cockpit for a model of the F-16C Block 42 in 1:48 scale, in the form matching the period from 2006 onward.
2 leftof 3
23 €17.24 € You save 5.76 €
Plastruct PLT90001

Angle (1 pcs) W/H 1.2, T 0.4, L 250 mm

In stock
1.08 €
HAD modelsHADE4810161:48

1:48 F-16C Block 52 Thunderbirds Show-Time 2024

F-16C Block 52 Thunderbirds decals for the 2024 season in 1:48 scale bring the markings of the American display team.
In stock
29.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.