A masking set for the cabin of the Vickers Valetta C.1 1:72 is intended for the glazing of the pilot's cabin of the British military transport. An accessory for a model, not a kit.
Responsibility details are not available.
Self-adhesive masks for the glazing of a model of the British twin-engine Vickers Valetta C.1 military transport in 1:72 scale. Transport aircraft typically have uneven pilot glazing with a great many short frames, and that is exactly where masking with tape by hand most often fails. The set does that work for you. It is neither a kit nor decals.
The Vickers Valetta was the military version of the Viking airliner, adapted to the needs of the Royal Air Force. Compared with its civil predecessor it received a strengthened floor, large cargo doors on the port side and a tailwheel landing gear. The C.1 version served as a general-purpose transport for carrying cargo, passengers and paratroops and operated in the Middle and Far East among other places. The type was one of the workhorses of the British transport service of the 1950s.
Never mask clear parts straight after taking them off the sprue: rinse them first and let them dry completely. Lay the mask down with tweezers and smooth the edges with a blunt tool, so that no air is left underneath. On a transport aircraft it pays to mask the cabin before the fuselage is glued together, while the part is readily accessible from all sides. Once it is sprayed, remove the masks as soon as possible and repair any overrun with varnish cleaner on a stick.
This is an accessory, not a kit. The model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
