A masking set for the glazing of the British Vickers Valetta C.1 transport aircraft for Valom kits in 1:72 scale.
Responsibility details are not available.
The Vickers Valetta C.1 was a British twin-engine military transport aircraft derived from the civil Viking type. In the C.1 version it served to carry people as well as cargo and was among the workhorses of the Royal Air Force in the postwar years. Its flight deck has divided front glazing and a row of side windows, so there is plenty to mask on a model.
The set contains ready masking shapes for the glazing, prepared for Valom kits in 1:72 scale. With them the cutting of tape to the frames is gone, which on a transport aircraft with many windows takes more time than the whole rest of building the fuselage. The shapes fit the parts of that particular kit, so all you do is take them off, lay them on and press them down, and the boundary of the paint runs exactly along the frame.
Wash the clear parts, degrease them and let them dry. Lay the masks on before spraying, press them down around the edge with a toothpick and apply the paint in several thin coats so that it does not creep under the edge. With long rows of windows, plan the work so that you do not have to turn the model before the paint has set. Take the masks off shortly after drying by pulling at an angle to the surface; if they stay on the model too long they come off less easily and can tear the paint away.
The set will be appreciated by builders of transport aircraft in 1:72 scale who know well how much work window after window takes and how many hours ready shapes save. The kit, the paints and the glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!