Wheels for the SLT-56 tractor in 1:72 scale are replacement parts that take the place of the box wheels on the finished model. Intended for the Takom 5011 kit.
Responsibility details are not available.
Replacement wheels cut for the model of the SLT-56 heavy wheeled tractor in the small scale. It is not the vehicle itself; it is an upgrade that is fitted during the build or swapped in afterwards. The target kit is the Takom 5011.
On heavy tractors the eye goes to the running gear first. Wheels from an ordinary kit tend to be split into two halves in 1:72, so a groove is left in the middle of the tread that can only be removed by careful sanding, and the tread pattern loses its crispness in the process. With a separately made wheel this step falls away and the pattern of the tread and the transition between the rim and the tire stay legible even after spraying.
Try dry whether all the wheels sit down on a flat surface, so that the vehicle does not stand crooked. Level the mating surfaces of the stub axles with a file and only then glue. Spray the dark rubber shade first, then finish the rims with a brush once it has dried, or cover them with circular masks. Apply the dust and mud from the bottom upward and let them show only on the lower part of the wheels, so that the vehicle does not look evenly dusted all over.
The set covers the wheels only. The basic model, the paints and the glue are not to be found in it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!