The M88A1 recovery vehicle is a plastic kit of an American heavy recovery vehicle in 1:35 scale.
Responsibility details are not available.
An injection-molded plastic kit of the American M88A1 heavy recovery vehicle in 1:35 scale from AFV Club. It is not a tank, but a recovery machine on a tracked chassis that tows and lifts damaged equipment.
The M88 is an American recovery vehicle introduced at the beginning of the 1960s, and in modernized forms it is still in service today. It has a low armored superstructure with no turret, a spade on the nose that braces itself into the ground during work, a folding boom and two winches. The A1 version received a diesel engine in place of the original gasoline one. The vehicle can lift a whole tank turret or drag out a bogged-down machine, and in both operations the spade holds it in place; without it, the vehicle would shift under the pull.
The boom and the spade are the main features of this vehicle, so decide first what position you will build them in and try them dry. Assemble the running gear according to the instructions and check that both sides sit at the same height; paint the inside of the hull and the running gear before you close the hull up. Recovery vehicles are strikingly dirty in service: mud on the spade, oily traces around the winch and a polished steel cable will add more to the credibility of the model than anything else. It pays to replace the cable with metal wire.
The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!