Ju 88 A – interior 3D decals 1:48 from the Ukrainian manufacturer Kelik. Relief color films for the cockpit of a model; the manufacturer intends them for ICM kits, and this is not the kit itself.
Responsibility details are not available.
Color 3D decals for the interior of the Junkers Ju 88 A in 1:48 scale from the Ukrainian manufacturer Kelik. It is not a kit but an accessory: the films carry printed colors and a raised relief and are applied inside the cockpit of a built model. The manufacturer intends them for ICM kits. The extent of the set is stated on the box.
The Junkers Ju 88 A was a German twin-engine combat aircraft that served as both a level and a dive bomber. It was powered by Jumo 211 V12 engines, the crew numbered four men, and the heavily glazed nose with stations for both the pilot and the bombardier is one of the type's most distinctive features. The A series aircraft bore the main weight of the Luftwaffe's bombing effort from 1939 and appeared in many sub-variants.
Apply them onto a dry, painted surface and work element by element. For fixing them the manufacturer recommends a transparent glue, a varnish or a slow-curing cyanoacrylate glue; leave decal softeners for ordinary decals. Press the elements into the engraved detail with a blunt toothpick, seal the edges with a thin coat of varnish and close the canopy only once everything has dried completely. Until you glue the films down, leave them on the backing paper and pick them up with flat-jawed tweezers: the thin edges ripple easily and are hard to flatten again.
This is an accessory for a model, not a kit. The ICM base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!