A colorless modeling base that is mixed into paint and makes a translucent coat of it. It serves for filters, glazes and smooth transitions between shades.
Responsibility details are not available.
A clear base is a colorless component of modeling chemicals that is added to paint. Unlike a thinner, which weakens the binder along with the shade, a coat with the base stays firm while becoming translucent. It comes into its own everywhere paint is meant to tint rather than to cover: in muting an over-saturated color, in filters over a dried base, in smooth transitions on a fuselage or a body, and in translucent glazes over metallic shades, which give a surface a color tinge and leave it its metallic look.
Mix it into the paint gradually in small doses and test the ratio each time on a spare card or a piece of plastic, because every shade behaves differently. Apply several thin coats rather than one heavy one, otherwise the translucency is lost and the surface darkens unevenly. Shake the bottle thoroughly before taking any out and close it again at once, so that the contents do not thicken. What the mixture is thinned with and what the tools are cleaned with follows from the composition of the base, so for the thinning, the mixing ratio and the resulting degree of sheen go by the manufacturer's instructions.
For modelers who work with translucent coats and want to mix them from paints they already have at home, whether they build aircraft, military equipment or automobiles. Paints, thinner and tools are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!