A fine metal mesh with a 0.5 by 0.5 mm aperture from Aber: a fabric for grilles, baskets and screens on models and in dioramas.
Responsibility details are not available.
A woven metal mesh with an aperture measuring half a millimeter by half a millimeter. It is not tied to a particular model or scale; it is a material from which the modeler cuts exactly what is needed. Against a photo-etched grille it has the advantage of being genuinely woven, so that the strands do not lie in one plane and light breaks on them as it does on a real net. It suits everywhere a surface should be open.
Cut the mesh with sharp photo-etch shears, and rather with a small margin that you then level with a file, because the edge runs away as you cut. Trace the shape from the kit part. It is bonded with super glue, that is, cyanoacrylate, applied with the tip of a wire so that it does not flood the apertures. Before painting, degrease the mesh with alcohol and apply a primer, ideally thinned, otherwise the apertures will fill with paint and the effect will be gone.
For modelers of vehicles who are replacing blind plastic grilles, and for builders of dioramas who need wire mesh, a screen or a fence. Because the material is sold in a piece and cut as needed, one package covers a whole series of different uses.
The edges of cut mesh are sharp. Work on a mat, protect your eyes and clear up the offcuts.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!