A modeling mesh with an interlaced weave with an opening size of 0.8 x 0.8 mm. A material for grilles, protective screens, baskets and other elements that are meant to stay see-through.
Responsibility details are not available.
This is a building material, not a finished part. The interlaced mesh with an opening of 0.8 x 0.8 mm is cut to measure and used everywhere an element is meant to be see-through and thin at the same time: the grilles of radiators and engine compartments, protective screens in front of headlights, baskets and stowage bins on vehicles, fencing and other accessories for a scene. A grille suggested by engraving into plastic stays solid, whereas you can see through mesh, and it is precisely that which gives such a spot away on a model.
The opening size of 0.8 x 0.8 mm is fixed, so what changes with the scale is what it corresponds to in reality. In 1:35 scale the opening works out at roughly 2.8 cm, in 1:48 scale at about 3.8 cm. Consider on that basis which subject the coarseness of the mesh suits; for a fine screen in a large scale the opening will be rather large, while for coarse wire netting it is just right.
Cut with sharp scissors or run the cut with a new blade on a hard support, best along a single row of openings, so that the edge stays straight. Cut the part a little larger first and level the excess off once it is in place. Choose the glue according to the material of the mesh and apply it drop by drop to the edges, otherwise it runs into the openings and blinds the mesh. Degrease the mesh before painting and lay the paint on in thin coats, ideally with an airbrush, so that the openings stay open.
The model, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
