Polystyrene sheets 0.25 mm from Aber: five thin sheets measuring 195 by 315 mm for building and modifying parts yourself.
Responsibility details are not available.
The package contains five polystyrene sheets measuring 195 by 315 millimeters with a thickness of 0.25 millimeters. It is a basic material for building things yourself: a thin sheet can be cut with scissors, scored with a scalpel, bent and joined with ordinary modeling cement for plastic, which welds the two parts together. In this thinnest gauge it suits sheet-metal covers, paneling and patches above all.
There is no need to cut a thin sheet all the way through: score it with a scalpel along a ruler and snap it, and the edge will be clean. The material is joined with cement for plastic, which welds the joint solid once it has dried. When bent cold the sheet springs back, so hold it over an edge or warm it slightly. Before painting it is enough to degrease the surface and apply a primer, just as on kit parts.
For modelers who make their own parts, rebuild kits or repair older models, and for builders of dioramas. The large format of the sheet means that the material will last through a whole series of projects and you do not have to be sparing with it.
When cutting, work on a cutting mat and draw the blade away from your body. Clear up the offcuts; the sharp edges of thin plastic are easy to drive into your skin.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!