Aber - stainless steel towing cable, 2.0 mm diameter, 1 m long is braided steel cable of a thicker diameter for making tow cables, ship rigging and crane cables on models.
Responsibility details are not available.
A one-meter length of braided stainless steel cable of 2.0 mm diameter from the Polish maker Aber. It is a modeling raw material, not a finished part - you cut the cable to the lengths your model needs. Because it is real braided steel cable, it has the right run of the lay and the metallic sheen that neither a plastic molding nor string can offer. Compared with the thinner diameters of the same range, this cable is markedly stiffer and holds a set sag better.
It typically replaces simplified plastic tow cables on armored vehicles and serves for making ship rigging, anchor and tow cables, crane hoisting cables and winches in dioramas. Stainless steel does not corrode, so the cable will last on a displayed model, and at the same time it can be shaped into a realistic bow that a rigid plastic part will never give you.
Before cutting, fix the place of the cut with a drop of super glue or tin it, so that the end does not unravel. Use pliers with hardened jaws or a miniature grinder with a cutting disc to part it - ordinary nippers for plastic will be destroyed on stainless steel. Make the end eyes from photo-etched parts, from thin brass sheet or from a loop secured with solder. If you want to paint the cable, degrease it first and lay down a primer for metals; it often looks best, though, left in bare metal with a wash to darken it and light rust pigments.
This is modeling material, not a finished part. Glue, paints and end eyes are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!