CLEAR ORANGE FINISH 1 SHEET (90 X 200MM)

Clear Orange Finish (90 x 200 mm)

Clear orange self-adhesive film from the Japanese manufacturer Hasegawa, supplied as a single sheet measuring 90 x 200 mm. The surface carries a glossy top layer, so the applied piece looks like a glazed light element rather than a painted area. The material is transparent and has no covering power; it is not an opaque paint. The surface underneath affects the resulting shade, which is why the film belongs over a light, silver or clear area.

Use

• Turn signals and side marker lights on cars
• Warning beacons, anti-collision lights and signal elements on aircraft and vehicles
• Translucent covers and filters on science fiction and modern subjects
• Cut it exactly to shape, peel off the backing paper and press it down with a soft cloth from the center toward the edges
• Trim the excess at the edge with a sharp scalpel; the blade has to be fresh, otherwise the film tears

Who it is for

For modelers of cars, aircraft and modern vehicles who want sharply bounded translucent orange areas without spraying and masking. The film is especially practical on small elements, where paint would be hard to lay down evenly and would risk running into the surroundings.

The material is transparent, has no covering power and does not replace an opaque paint. Store it flat and out of direct sunlight.