1:48 A6M Zero seat belts - 3D printed decals by ASK

Art Scale ASK 1:48 A6M Zero — seat belts as 3D-printed decals

A detail accessory from Art Scale for modelers who want convincing seat belts in the cockpit of the Zero. It is neither an aircraft model nor a kit — it is a set of cockpit belts in 1:48 scale, made as 3D-printed decals. It combines the advantages of both worlds: it is applied as easily as a classic decal, but thanks to 3D printing the surface has real relief and three-dimensional body, so the belts do not look like a flat drawing on the seat. The belts are also colored, so the laborious painting of miniature straps and buckles falls away. The set is intended for models of the Japanese carrier fighter A6M Zero in 1:48 scale.

Use

• Intended for the cockpit of an A6M Zero model in 1:48 scale — as a replacement for photo-etch or painted belts.
• It is applied like a decal: the part is released from the backing and settled on the seat and around it, much like an ordinary decal.
• The surface should be smooth and degreased, ideally coated with gloss varnish — as with any decal.
• Lay the belts in place carefully so that the relief is not damaged; do not press them down flat.
• Painting the belts is usually not needed — they come colored; the tone can be evened out with a light wash or a thin coat of matte varnish.
• Close the cockpit up only once everything is dry — after they settle the belts stand proud and would rub off easily.

Who it is for

For modelers who are building the A6M Zero in 1:48 and want to get detail at the level of photo-etch into the cockpit quickly, but without bending and painting metal strips. Both experienced builders and those who do not trust themselves with photo-etch will appreciate it — the result is colored and three-dimensional as soon as it is stuck on.

Note: this is an accessory for a model, not a model in its own right. The model, glue and paints are not included in the package.