1:32 Do-335? Pfeil wheels set (weighted)

A replacement set of wheels for a model of the Do 335 Pfeil in 1:32 scale. The tires are rendered with a weighted flat spot, so the model stands on the ground convincingly.

Scale1:32
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

13.96 €
11.54 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Do 335 was among the most unusual German airplanes of the late Second World War. It had its two engines arranged in tandem one behind the other in the fuselage: the front one drove a tractor propeller in the nose, the rear one a pusher propeller behind the tail surfaces. That did away with the drag of engine nacelles on the wing. The machine stood on nose landing gear and was exceptionally heavy for its category, so the main wheels were visibly compressed under its weight. The name Pfeil is attached to the type as a nickname.

What the set contains

Replacement wheels in 1:32 scale with tires rendered with a weighted flat spot. The tread, the sidewall lettering and the transition from tire to disc tend to be sharper and deeper on separate wheels than on the parts in a kit, so the difference shows on a finished model at first glance. Which particular model the set is meant to replace parts on and how many parts it holds is given in the manufacturer's instructions.

Building and painting tips

The parts are not polystyrene; they are bonded with cyanoacrylate glue. Cut the excess material away with a sharp blade a little way from the part and sand the remainder down, then wash and degrease the wheels, otherwise the paint will not hold on them. When gluing, make sure the flattened part of the tire faces the ground and that both main wheels seat on the surface equally; otherwise the model will stand crooked and the error is conspicuous. Paint the tire in a dark gray tone rather than black, pick the discs out differently and finally dust the wheels lightly so that they do not look new.

  • 1:32 scale, a replacement set of wheels
  • tires with a weighted flat spot
  • a sharper tread and lettering than on the parts from the kit
  • bonded with cyanoacrylate glue; degreasing before painting is essential

Terms of supply

The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The tire has a flat area rendered where it meets the ground, as if the weight of the airplane were pressing on the wheel. The model then does not look as if it were floating above the surface.

So that the flattened part faces the ground and both main wheels seat equally. Otherwise the model will stand crooked.

The particular kit is given in the manufacturer's instructions. Check before you buy that it matches the model you are building.

Cyanoacrylate glue. They are not polystyrene, so cement for plastic will not hold on them.

Last seen

ReskitRS32-03311:32

1:32 Do-335? Pfeil wheels set (weighted)

A replacement set of wheels for a model of the Do 335 Pfeil in 1:32 scale. The tires are rendered with a weighted flat spot, so the model stands on the ground convincingly.
In stock
13.96 €
Firma4949A116/161:16

1:16 Pouches for MP38 and MP40

Magazine pouches for the MP 38 and MP 40 submachine guns in 1:16 scale. An equipment accessory for large figures of German soldiers.
In stock
5.96 €
AK interactiveAK8211

MASKING SHEET A4 X 2 UNITS

AK Interactive Masking Sheet A4 (2 Pieces) is a self-adhesive masking film in A4 size for cutting your own masks.
In stock
5.56 €
Aires/QuickboostQB723161:72

1:72 Mi-24 Hind guns

Quickboost 1:72 Mi-24 Hind Gun Barrels is a resin replacement part for sharpening a model of the Soviet attack helicopter.
In stock
3.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.