Reskit 1:32 Polikarpov I-16 wheel set is a resin detail set that replaces the plastic wheels of the kit with faithfully cast parts with a fine tire tread and well-defined hubs.
Responsibility details are not available.
This is an aftermarket detail set in resin (3D printed in the newer releases), not a standalone kit. The set from Reskit contains replacement wheels for models of the Polikarpov I-16 in 1:32 scale and raises the realism of the landing gear compared with the parts of the base kit.
The resin wheels have a crisply cast tire tread and a fine structure on the hubs that plastic parts from a production mold usually do not reach. The casting is usually done so that the tire looks weighted, which gives a standing model a natural look. The wheels are fitted in place of the original plastic ones.
Wash the parts first with lukewarm water and detergent to remove the remains of the mold release agent. Cut the casting blocks off carefully and sand the surface; protect your airways while sanding resin. They are bonded with super glue (cyanoacrylate). Before gluing we recommend spraying them with a base coat (primer).
A resin detail set. It is not a complete kit; the base model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
