1:48 Fw 190 D-9 masks for crosses

Omask 1:48 Fw 190 D-9 masks for crosses is a mask set for spraying the national insignia — the German crosses — on an Fw 190 D-9 model in 1:48 scale. It is not a model but an accessory that replaces decals with sprayed insignia.

Scale1:48
Manufacturer Omask
Product EAN8591111482721

Responsibility details are not available.

7.16 €
5.92 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Omask 1:48 Fw 190 D-9 masks for crosses

A mask set from Omask intended for spraying the national insignia (the German crosses) on a model of the Fw 190 D-9 fighter in 1:48 scale. It is not a kit and not a part of a model but an accessory for the painting stage: thanks to precisely cut masks you spray the crosses on the fuselage and wings directly in paint instead of using decals.

Use

  • Stick the mask onto camouflage that has already been sprayed and dried, in the place where the insignia belongs, and press the edges down carefully.
  • Spray the individual colors of the insignia in the order of the layers — typically the light (white) base or border first, and once dry the dark (black) fill of the cross.
  • Spray in thin coats at lower pressure — a heavy coat increases the risk of bleeding under the edge of the mask.
  • Remove the mask while the paint is not yet fully cured; the edges of the insignia then stay sharp and clean.
  • Correct any small imperfections with a brush, then give the whole model a matte or semi-gloss clear coat.

Why spray the crosses instead of using decals

A sprayed insignia has no carrier film, so the glossy edges around a decal and the risk of silvering on a matte surface both disappear. The paint also follows the panel lines, riveting and surface texture — the insignia looks as if it really were sprayed onto metal rather than stuck on as paper. That is especially noticeable with the large crosses on the fuselage and wings, where decal film shows most. Sprayed insignia also take subsequent weathering and paint chipping better.

Who the set is for

For modelers building the Fw 190 D-9 in 1:48 who want to raise the quality of the markings above the level of decals. Work with an airbrush and basic experience of masking are assumed, so this is equipment rather for the intermediate and advanced. The model, paints and clear coats are not included in the package.

The masks serve only for masking while painting. Paints and thinners may be flammable — work in a well-ventilated area and use respiratory protection. Contains small parts; not suitable for small children.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a mask set for spraying national insignia. The Fw 190 D-9 model in 1:48, paints and clear coats are bought separately.

They have no carrier film, so no glossy edges or silvering appear on matte camouflage. The paint follows the panel lines and riveting and the insignia looks as though it really were sprayed onto metal.

The set assumes work with an airbrush and experience of masking. We recommend it rather to intermediate and advanced modelers; it is a good idea to try the spraying on a spare part first.

Press the edges of the mask down carefully, spray at lower pressure and in several thin coats. Remove the mask before the paint has fully cured.

Last seen

OmaskOMK240531:48

1:48 Fw 190 D-9 masks for crosses

Omask 1:48 Fw 190 D-9 masks for crosses is a mask set for spraying the national insignia — the German crosses — on an Fw 190 D-9 model in 1:48 scale. It is not a model but an accessory that replaces decals with sprayed insignia.
In stock
7.16 €
QuickwheelQW-1231:35

1:35 M109 A2 Howitzer - AFV Club

1:35 M109 A2 Howitzer is a Quickwheel masking set for the road wheels of the M109A2 self-propelled howitzer. The set is cut for the kit from AFV Club.
In stock
9.16 €
EduardED64811291:48

1:48 DB-7B Boston III exhausts PRINT

A resin set of exhausts for models of the DB-7B Boston III light bomber in 1:48 scale. The parts are made by direct 3D printing and replace the simplified plastic exhausts.
In stock
6 €
RYE FIELD MODELRM21051:35

1:35 King Tiger Upgrade set for Rye Field RM-5125/5137/5146

An extensive upgrade set for models of the King Tiger in 1:35 scale refines the details of Rye Field Model kits.
In stock
29.16 €
Aires/QuickboostQB723981:72

1:72 Spitfire Mk.I seat with safety belts

Spitfire Mk.I seat with belts 1:72 (Quickboost) is a resin aircraft accessory in 1:72 scale from Quickboost. It is not an airplane model, but a detail part. It is supplied unassembled and unpainted.
In stock
3.56 €
TamiyaTA350501:35

1:35 German 8ton Semitrack Sd.Kfz 7/1 20mm Flakvierling

A plastic kit of the German 8-ton half-track Sd.Kfz.7/1 with the 2 cm Flakvierling anti-aircraft gun (1:35) from Tamiya. A half-track tractor with a quadruple anti-aircraft gun.
In stock
22.76 €
RESArmRA48-030751:48

1:48 De Havilland Mosquito (LATE) Wheels under load

RESArm 1:48 De Havilland Mosquito (LATE) Wheels under load is a resin wheel set with a simulated load for refining a model of this British aircraft. It is a detail accessory, not a model.
In stock
6.36 €
HaulerHLU350441:35

1:35 Autoblinda AB-43 (Italeri)

1:35 Autoblinda AB-43 is a Hauler photo-etched accessory set for a kit of the Italian armored car, not a model of the vehicle. It adds fine metal parts where injection-molded plastic is too coarse for the scale.
In stock
15.56 €
104 MS GUNDAM IBO MULTIUSE 2 (Gundam 83677P)-25 %Stock ClearanceFavorite
BandaiBAN19603

104 MS GUNDAM IBO MULTIUSE 2 (Gundam 83677P)

An accessory for plastic models in the space and science fiction field, carrying the sequence number 104 in the Multiuse range on the Gundam theme. The type of goods is stated on the box and in the manufacturer's instructions.
Last one!
6.36 €4.76 € You save 1.60 €
Green Stuff WorldGSW5597

Wine and Beer Bottles Resin Set

A set of clear resin wine and beer bottles in two sizes, twenty-eight pieces in all. Equipment for a tap room, a cellar or an inn table in a figure setting.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.