1:72 Mosquito B.Mk.XVI PR.XVI double-sided painting mask

Mosquito B.Mk.XVI and PR.Mk.XVI masking set, 1:72 scale

A double-sided set of masks for spraying a model of the de Havilland Mosquito in the B.Mk.XVI and PR.Mk.XVI versions in 1:72 scale. The masks are stuck onto the part before painting and uncover only the area that is to be sprayed.

The real subject

The Mosquito was a British twin-engine aircraft of the Second World War, famous for an airframe that was largely wooden. It was built in many configurations, and both designations in the name carry the same number Mk.XVI but differ in their task: the B version is a bomber, the PR version a reconnaissance aircraft. This type has many-framed glazing, so masking is more rewarding than painting the frames by hand.

How to work with the masks

• Wash and degrease the surface of the part before sticking the mask on, otherwise the mask will not seat and paint will run under it.
• Move the mask with tweezers, position it along the frame and press the edges down along their whole length.
• Apply the paint in thin coats; a thick coat peels off when the mask is lifted.
• Take the mask off shortly after the paint has dried, slowly and at an angle to the surface.
• Do not glue a clear part with cyanoacrylate glue, as its fumes will fog the glazing.

Who it is for

For builders of British aircraft of the Second World War in 1:72 scale who want the frames sharp and the glass clean even after the whole model has been sprayed. The layout of the individual masks and what each is for are given by the manufacturer in the instructions. The package holds masks only; the model, paints and glue are not included, unless stated otherwise.