36.0mm Disc Saw Coarse

Voyager 36 mm circular saw - coarse teeth

A thin photo-etched circular saw blade from Voyager Model, 36 mm in diameter, with coarse teeth. It is used for cutting model parts accurately - plastic, resin, thin metal and sections. Thanks to the small thickness of the blade the kerf is narrow and the waste minimal. The blade is clamped into an ordinary modeling handle (a knife handle).

Use

• 36 mm diameter - a larger diameter allows a deeper cut and a longer stroke
• Coarse teeth: a faster cut and better removal of material, suited to thicker sections, sprue gates and harder materials
• Suitable for thicker plastic and resin parts, casting blocks and sprue gates
• A narrow kerf and minimal loss of material

Who it is for

For modelers who need to separate parts accurately, shorten a section or make a clean cut where an ordinary saw would be too coarse. The blade is intended for a knife handle and suits the building and reworking of plastic and resin kits as well as work with accessory sets. Choose the diameter according to the depth of cut and the coarseness of the teeth according to the material and the cleanliness of cut you want - that way you can prepare a set of blades for different jobs for a single handle. A circular blade keeps the cut in one plane better than a straight saw, which helps with longer and more accurate cuts.

The teeth are sharp - work carefully, guide the cut with light pressure and store the blade so that the teeth cannot be damaged. Protect your airways when sanding resin.