The Aber etched perforated plate 0.9 mm is a brass sheet with 0.9 mm holes for perforated panels, covers and anti-slip surfaces on models.
Responsibility details are not available.
This is a versatile photo-etched accessory, not a kit. Aber (the Polish maker of photo-etched parts) supplies a thin brass sheet with regularly spaced circular holes 0.9 mm in diameter. It is a solid plate with an etched pattern of holes, not a woven mesh.
A perforated plate is used wherever the real subject has sheet metal with regular holes: perforated panels, covers, anti-slip surfaces, filter plates and ventilation grilles. The medium hole size of 0.9 mm gives a clearly visible pattern. The material is thin, holds its shape and cuts easily to size.
Cut the part out with sharp photo-etch scissors or break it off the fret, and degrease the surface beforehand. Glue the plate with super glue (cyanoacrylate) or with a two-part adhesive; apply a primer for metal before painting.
The accessory is supplied unassembled and unpainted. Glue, paints and other materials are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
