1:32 GUIDED MISSILE X-29L

Kh-29L guided missile in 1:32 scale from Temp Models

The set brings a 3D printed replica of the Kh-29L guided missile, in transliteration also written X-29L, in 1:32 scale from Temp Models. It is not a model of an aircraft but underwing armament with which you complete a finished build. The printed rendition gives the crisper edges of the stabilizing and control surfaces and finer surface detail than injection-molded plastic offers, and it does without a seam line across the whole body of the missile.

The real subject

The Kh-29 is a Soviet and Russian air-to-ground missile with a heavy warhead against hardened targets. The version designated L is semi-actively laser guided: somebody has to illuminate the target with a laser beam, whether from the aircraft or from the ground, and the missile homes on the reflected light. Against the television version it has a different nose with an optical sensor; otherwise the shape of the missile is the same.

Building and painting tips

The parts are printed from resin and are held only by thin supports. Cut them off with a sharp scalpel as close to the part as possible, sand the marks down with fine sandpaper and protect your airways while sanding. It is glued with cyanoacrylate glue (super glue). Paint holds longer on a smooth print if you lay a thin coat of primer under it. Paint the underwing weapons separately and glue them onto the model only after the landing gear and the cockpit are finished.

Who the set is for

• Modelers who build an aircraft in full combat configuration
• Builders who are bothered by soft edges and seam lines on plastic weapons
• More experienced modelers used to resin and cyanoacrylate glue
• Collectors of Soviet and Russian aircraft equipment in 1:32

The set is an addition to building a model, not a model in its own right. It is supplied unassembled and unpainted, and glue, paints and the base kit are not included in the package, unless stated otherwise.